Datenschutz | AGB | Impressum

06:05 11.9.2019 - 0 Kommentare

Max performance battery replacement - Pioneer BP26A cellphone battery 2650mAh/10.07WH 3.8V. BP26A smartphpne batteries are compatible with battery charging Pioneer C1. Shopping BP26A battery online, more discount and money-saving. Check your Pioneer model before you order BP26A mobile phone battery service. Cost-effective battery replacement, please visit www.batteryclub.org for more information.

ECN10847_Te

  • Brand : Pioneer Battery

  • Type : Li-ion

  • Capacity : 2650mAh/10.07WH

  • Volatge : 3.8VIs there no battery model you find? Take it easy! Contact us fast with your e-mail for what battery models your are looking for. 

    Email: info@batteryclub.org

BP26A Replaceable universal battery model

BP26A

Perfectly compatible with Pioneer C1:

for Pioneer C1Charge limit voltage:4.35V

Pioneer BP26A Mobile phone battery repair tips

1. Refrigerator freezing method. Wrap the battery in paper, then wrap it in plastic wrap and put it into the frozen layer for about 3 days. After taking it out, place it in a cool place and let it dry for two days. Try charging again.

Explanation: The process of using the mobile phone is a process of charging and discharging the battery, and the negative and positive charges in the battery collide with each other. The reason why it is more and more unreliable and troublesome is that at normal temperature, the kinetic energy of the electron is relatively large, the battery is in an active state, and the leakage is relatively frequent. When the battery is in a low temperature environment, the structure of the lithium film and the electrolyte on the surface does not change much, and the interface thereof changes significantly. The leakage current and the like are reduced, and the standby time is increased.

2. Rubber wipe method. Using a clean eraser to wipe the metal surface of the phone's battery and the phone can also improve the use.

Explanation: For a long time, the metal surface of the battery has a certain degree of oxidation, resulting in poor contact and short use time, while the rubber enamel can erase the oxide layer on the surface to make the contact better. This method is more suitable for situations where the problem is not very serious.

3. Recharge the activation method. Discharge the battery completely and recharge it again.

Detailed steps: Find two wires and connect a small 1.5-volt bulb. Connect the two ends of the wire to the positive and negative terminals of the battery. After connecting, the light bulb will emit some shimmer. Wait until the light bulb is completely extinguished and recharge. This can also be changed. Battery performance. But this method is not very effective, but it is still somewhat useful.

Populary Sale Recommendation

Tablet battery:

Amazon 26S1014 tablet battery replacement 58-000219 HD26S1014-A-H(1ICP4/100/118)

Lenovo ideapad yoga series tablet battery L15L3PB0

L16D2P31 battery for Lenovo tab4 plus

TOSHIBA Portege android tablet battery PA5137U

LG G PAD series PC tablet battery BL-T18

Laptop battery:

Lenovo ThinkPad P70 laptop battery 00HW030

HP laptop battery SE03XL replacement 849568-421 849908-850

Lenovo YOGA 11E notebook battery for SB10K97595

Samsung ATIV Book 8 laptop series battery AA-PLVN8NP

ASUS Q501L series laptop battery model C41-N541

Medion Akoya Erazer series laptop battery A41-D17

 

cellphone battery

ASUS ZENFONE 4 smartphone battery C11P1618

Alcatel cellphone BATTERY TLP038B1

Google Pixel 3 cellphone battery G013A-B

iPhone 5S & 5C smartphone battery model apple 616 0721

Lenovo Vibe series mobile phone battery BL262

 

 

Other battery

4.4ah / 36V VICTPOWER 10S2P18650 Li-Battery for Smart Balance Wheel

LOGITECH L-LU18 Lion Rechargeable battery for Harmony Remote 1000 1100 NR

Garmin Driveluxe 50 battery 820mAh for 361-00056-21 1ICP6/35/50

Honeywell BAT-SCN01 BATTERY 2400mAh 3.75V

Nautiz X8 li-ion battery replacement BP14-001200 NX8-1004

ARLO PRO or PRO 2 Camera battery A-1

NETGEAR battery W-10A for NightHawk Router/Modem M1 MR1100

 

power adapter &  PC PSU

LG 34-Inch Ultra Wide QHD Monitor power 19v adapter replacement LCAP31 EAY62949001 EAY63128702

LG gram laptop 19v adapter EAY65249101 replacement ADS-48MS-19-2 19048E 

310W HP ProDesk PC PCG007 POWER SUPPLY

06:05 11.9.2019 - 0 Kommentare

Max performance battery replacement - Philips AB3000GWMT cellphone battery 3000mAh/11.4WH 3.8V. AB3000GWMT smartphpne batteries are compatible with battery charging Philips S616. Shopping AB3000GWMT battery online, more discount and money-saving. Check your Philips model before you order AB3000GWMT mobile phone battery service. Cost-effective battery replacement, please visit www.batteryclub.org for more information.

PH1526I_Te

  • Brand : Philips Battery

  • Type : Li-ion

  • Capacity : 3000mAh/11.4WH

  • Volatge : 3.8VIs there no battery model you find? Take it easy! Contact us fast with your e-mail for what battery models your are looking for. 

    Email: info@batteryclub.org

AB3000GWMT Replaceable universal battery model

AB3000GWMT

Perfectly compatible with Philips S616:

for Philips S616Charge limit voltage:4.35V

Philips AB3000GWMT Mobile phone battery repair tips

1. Refrigerator freezing method. Wrap the battery in paper, then wrap it in plastic wrap and put it into the frozen layer for about 3 days. After taking it out, place it in a cool place and let it dry for two days. Try charging again.

Explanation: The process of using the mobile phone is a process of charging and discharging the battery, and the negative and positive charges in the battery collide with each other. The reason why it is more and more unreliable and troublesome is that at normal temperature, the kinetic energy of the electron is relatively large, the battery is in an active state, and the leakage is relatively frequent. When the battery is in a low temperature environment, the structure of the lithium film and the electrolyte on the surface does not change much, and the interface thereof changes significantly. The leakage current and the like are reduced, and the standby time is increased.

2. Rubber wipe method. Using a clean eraser to wipe the metal surface of the phone's battery and the phone can also improve the use.

Explanation: For a long time, the metal surface of the battery has a certain degree of oxidation, resulting in poor contact and short use time, while the rubber enamel can erase the oxide layer on the surface to make the contact better. This method is more suitable for situations where the problem is not very serious.

3. Recharge the activation method. Discharge the battery completely and recharge it again.

Detailed steps: Find two wires and connect a small 1.5-volt bulb. Connect the two ends of the wire to the positive and negative terminals of the battery. After connecting, the light bulb will emit some shimmer. Wait until the light bulb is completely extinguished and recharge. This can also be changed. Battery performance. But this method is not very effective, but it is still somewhat useful.

Populary Sale Recommendation

Tablet battery:

Amazon 26S1014 tablet battery replacement 58-000219 HD26S1014-A-H(1ICP4/100/118)

Lenovo ideapad yoga series tablet battery L15L3PB0

L16D2P31 battery for Lenovo tab4 plus

TOSHIBA Portege android tablet battery PA5137U

LG G PAD series PC tablet battery BL-T18

Laptop battery:

Lenovo ThinkPad P70 laptop battery 00HW030

HP laptop battery SE03XL replacement 849568-421 849908-850

Lenovo YOGA 11E notebook battery for SB10K97595

Samsung ATIV Book 8 laptop series battery AA-PLVN8NP

ASUS Q501L series laptop battery model C41-N541

Medion Akoya Erazer series laptop battery A41-D17

 

cellphone battery

ASUS ZENFONE 4 smartphone battery C11P1618

Alcatel cellphone BATTERY TLP038B1

Google Pixel 3 cellphone battery G013A-B

iPhone 5S & 5C smartphone battery model apple 616 0721

Lenovo Vibe series mobile phone battery BL262

 

 

Other battery

4.4ah / 36V VICTPOWER 10S2P18650 Li-Battery for Smart Balance Wheel

LOGITECH L-LU18 Lion Rechargeable battery for Harmony Remote 1000 1100 NR

Garmin Driveluxe 50 battery 820mAh for 361-00056-21 1ICP6/35/50

Honeywell BAT-SCN01 BATTERY 2400mAh 3.75V

Nautiz X8 li-ion battery replacement BP14-001200 NX8-1004

ARLO PRO or PRO 2 Camera battery A-1

NETGEAR battery W-10A for NightHawk Router/Modem M1 MR1100

 

power adapter &  PC PSU

LG 34-Inch Ultra Wide QHD Monitor power 19v adapter replacement LCAP31 EAY62949001 EAY63128702

LG gram laptop 19v adapter EAY65249101 replacement ADS-48MS-19-2 19048E 

310W HP ProDesk PC PCG007 POWER SUPPLY

06:04 11.9.2019 - 0 Kommentare

Max performance battery replacement - PHILIPS AB3100AWMT cellphone battery 3100mAh/11.47WH 3.7V. AB3100AWMT smartphpne batteries are compatible with battery charging PHILIPS CTE180BK,CTE180BK/00,Xenium E180. Shopping AB3100AWMT battery online, more discount and money-saving. Check your PHILIPS model before you order AB3100AWMT mobile phone battery service. Cost-effective battery replacement, please visit www.batteryclub.org for more information.

ECN10849_Te

  • Brand : PHILIPS Battery

  • Type : Li-ion

  • Capacity : 3100mAh/11.47WH

  • Volatge : 3.7VIs there no battery model you find? Take it easy! Contact us fast with your e-mail for what battery models your are looking for. 

    Email: info@batteryclub.org

AB3100AWMT Replaceable universal battery model

AB3100AWMT

Perfectly compatible with PHILIPS CTE180BK,CTE180BK/00,Xenium E180:

For PHILIPS CTE180BK,CTE180BK/00,Xenium E180Charge limit voltage:4.2V

PHILIPS AB3100AWMT Mobile phone battery repair tips

1. Refrigerator freezing method. Wrap the battery in paper, then wrap it in plastic wrap and put it into the frozen layer for about 3 days. After taking it out, place it in a cool place and let it dry for two days. Try charging again.

Explanation: The process of using the mobile phone is a process of charging and discharging the battery, and the negative and positive charges in the battery collide with each other. The reason why it is more and more unreliable and troublesome is that at normal temperature, the kinetic energy of the electron is relatively large, the battery is in an active state, and the leakage is relatively frequent. When the battery is in a low temperature environment, the structure of the lithium film and the electrolyte on the surface does not change much, and the interface thereof changes significantly. The leakage current and the like are reduced, and the standby time is increased.

2. Rubber wipe method. Using a clean eraser to wipe the metal surface of the phone's battery and the phone can also improve the use.

Explanation: For a long time, the metal surface of the battery has a certain degree of oxidation, resulting in poor contact and short use time, while the rubber enamel can erase the oxide layer on the surface to make the contact better. This method is more suitable for situations where the problem is not very serious.

3. Recharge the activation method. Discharge the battery completely and recharge it again.

Detailed steps: Find two wires and connect a small 1.5-volt bulb. Connect the two ends of the wire to the positive and negative terminals of the battery. After connecting, the light bulb will emit some shimmer. Wait until the light bulb is completely extinguished and recharge. This can also be changed. Battery performance. But this method is not very effective, but it is still somewhat useful.

Populary Sale Recommendation

Tablet battery:

Amazon 26S1014 tablet battery replacement 58-000219 HD26S1014-A-H(1ICP4/100/118)

Lenovo ideapad yoga series tablet battery L15L3PB0

L16D2P31 battery for Lenovo tab4 plus

TOSHIBA Portege android tablet battery PA5137U

LG G PAD series PC tablet battery BL-T18

Laptop battery:

Lenovo ThinkPad P70 laptop battery 00HW030

HP laptop battery SE03XL replacement 849568-421 849908-850

Lenovo YOGA 11E notebook battery for SB10K97595

Samsung ATIV Book 8 laptop series battery AA-PLVN8NP

ASUS Q501L series laptop battery model C41-N541

Medion Akoya Erazer series laptop battery A41-D17

 

cellphone battery

ASUS ZENFONE 4 smartphone battery C11P1618

Alcatel cellphone BATTERY TLP038B1

Google Pixel 3 cellphone battery G013A-B

iPhone 5S & 5C smartphone battery model apple 616 0721

Lenovo Vibe series mobile phone battery BL262

 

 

Other battery

4.4ah / 36V VICTPOWER 10S2P18650 Li-Battery for Smart Balance Wheel

LOGITECH L-LU18 Lion Rechargeable battery for Harmony Remote 1000 1100 NR

Garmin Driveluxe 50 battery 820mAh for 361-00056-21 1ICP6/35/50

Honeywell BAT-SCN01 BATTERY 2400mAh 3.75V

Nautiz X8 li-ion battery replacement BP14-001200 NX8-1004

ARLO PRO or PRO 2 Camera battery A-1

NETGEAR battery W-10A for NightHawk Router/Modem M1 MR1100

 

power adapter &  PC PSU

LG 34-Inch Ultra Wide QHD Monitor power 19v adapter replacement LCAP31 EAY62949001 EAY63128702

LG gram laptop 19v adapter EAY65249101 replacement ADS-48MS-19-2 19048E 

310W HP ProDesk PC PCG007 POWER SUPPLY

06:04 11.9.2019 - 0 Kommentare

Max performance battery replacement - PHILIPS AB1000AWML cellphone battery 1000mAh/3.7WH 3.7V. AB1000AWML smartphpne batteries are compatible with battery charging PHILIPS E320 E321. Shopping AB1000AWML battery online, more discount and money-saving. Check your PHILIPS model before you order AB1000AWML mobile phone battery service. Cost-effective battery replacement, please visit www.batteryclub.org for more information.

ECN10850_Te

  • Brand : PHILIPS Battery

  • Type : Li-ion

  • Capacity : 1000mAh/3.7WH

  • Volatge : 3.7VIs there no battery model you find? Take it easy! Contact us fast with your e-mail for what battery models your are looking for. 

    Email: info@batteryclub.org

AB1000AWML Replaceable universal battery model

AB1000AWML

Perfectly compatible with PHILIPS E320 E321:

For PHILIPS E320 E321Charge limit voltage:4.2V

PHILIPS AB1000AWML Mobile phone battery repair tips

1. Refrigerator freezing method. Wrap the battery in paper, then wrap it in plastic wrap and put it into the frozen layer for about 3 days. After taking it out, place it in a cool place and let it dry for two days. Try charging again.

Explanation: The process of using the mobile phone is a process of charging and discharging the battery, and the negative and positive charges in the battery collide with each other. The reason why it is more and more unreliable and troublesome is that at normal temperature, the kinetic energy of the electron is relatively large, the battery is in an active state, and the leakage is relatively frequent. When the battery is in a low temperature environment, the structure of the lithium film and the electrolyte on the surface does not change much, and the interface thereof changes significantly. The leakage current and the like are reduced, and the standby time is increased.

2. Rubber wipe method. Using a clean eraser to wipe the metal surface of the phone's battery and the phone can also improve the use.

Explanation: For a long time, the metal surface of the battery has a certain degree of oxidation, resulting in poor contact and short use time, while the rubber enamel can erase the oxide layer on the surface to make the contact better. This method is more suitable for situations where the problem is not very serious.

3. Recharge the activation method. Discharge the battery completely and recharge it again.

Detailed steps: Find two wires and connect a small 1.5-volt bulb. Connect the two ends of the wire to the positive and negative terminals of the battery. After connecting, the light bulb will emit some shimmer. Wait until the light bulb is completely extinguished and recharge. This can also be changed. Battery performance. But this method is not very effective, but it is still somewhat useful.

Populary Sale Recommendation

Tablet battery:

Amazon 26S1014 tablet battery replacement 58-000219 HD26S1014-A-H(1ICP4/100/118)

Lenovo ideapad yoga series tablet battery L15L3PB0

L16D2P31 battery for Lenovo tab4 plus

TOSHIBA Portege android tablet battery PA5137U

LG G PAD series PC tablet battery BL-T18

Laptop battery:

Lenovo ThinkPad P70 laptop battery 00HW030

HP laptop battery SE03XL replacement 849568-421 849908-850

Lenovo YOGA 11E notebook battery for SB10K97595

Samsung ATIV Book 8 laptop series battery AA-PLVN8NP

ASUS Q501L series laptop battery model C41-N541

Medion Akoya Erazer series laptop battery A41-D17

 

cellphone battery

ASUS ZENFONE 4 smartphone battery C11P1618

Alcatel cellphone BATTERY TLP038B1

Google Pixel 3 cellphone battery G013A-B

iPhone 5S & 5C smartphone battery model apple 616 0721

Lenovo Vibe series mobile phone battery BL262

 

 

Other battery

4.4ah / 36V VICTPOWER 10S2P18650 Li-Battery for Smart Balance Wheel

LOGITECH L-LU18 Lion Rechargeable battery for Harmony Remote 1000 1100 NR

Garmin Driveluxe 50 battery 820mAh for 361-00056-21 1ICP6/35/50

Honeywell BAT-SCN01 BATTERY 2400mAh 3.75V

Nautiz X8 li-ion battery replacement BP14-001200 NX8-1004

ARLO PRO or PRO 2 Camera battery A-1

NETGEAR battery W-10A for NightHawk Router/Modem M1 MR1100

 

power adapter &  PC PSU

LG 34-Inch Ultra Wide QHD Monitor power 19v adapter replacement LCAP31 EAY62949001 EAY63128702

LG gram laptop 19v adapter EAY65249101 replacement ADS-48MS-19-2 19048E 

310W HP ProDesk PC PCG007 POWER SUPPLY

06:03 11.9.2019 - 0 Kommentare

Max performance battery replacement - PHILIPS AB1630DWMC cellphone battery 1630mAh/6.0WH 3.7V. AB1630DWMC smartphpne batteries are compatible with battery charging PHILIPS X2560 X2566 E310 phone. Shopping AB1630DWMC battery online, more discount and money-saving. Check your PHILIPS model before you order AB1630DWMC mobile phone battery service. Cost-effective battery replacement, please visit www.batteryclub.org for more information.

ECN10851_Te

  • Brand : PHILIPS Battery

  • Type : Li-ion

  • Capacity : 1630mAh/6.0WH

  • Volatge : 3.7VIs there no battery model you find? Take it easy! Contact us fast with your e-mail for what battery models your are looking for. 

    Email: info@batteryclub.org

AB1630DWMC Replaceable universal battery model

AB1630DWMC

Perfectly compatible with PHILIPS X2560 X2566 E310 phone:

For PHILIPS X2560 X2566 E310Charge limit voltage:4.2V

PHILIPS AB1630DWMC Mobile phone battery repair tips

1. Refrigerator freezing method. Wrap the battery in paper, then wrap it in plastic wrap and put it into the frozen layer for about 3 days. After taking it out, place it in a cool place and let it dry for two days. Try charging again.

Explanation: The process of using the mobile phone is a process of charging and discharging the battery, and the negative and positive charges in the battery collide with each other. The reason why it is more and more unreliable and troublesome is that at normal temperature, the kinetic energy of the electron is relatively large, the battery is in an active state, and the leakage is relatively frequent. When the battery is in a low temperature environment, the structure of the lithium film and the electrolyte on the surface does not change much, and the interface thereof changes significantly. The leakage current and the like are reduced, and the standby time is increased.

2. Rubber wipe method. Using a clean eraser to wipe the metal surface of the phone's battery and the phone can also improve the use.

Explanation: For a long time, the metal surface of the battery has a certain degree of oxidation, resulting in poor contact and short use time, while the rubber enamel can erase the oxide layer on the surface to make the contact better. This method is more suitable for situations where the problem is not very serious.

3. Recharge the activation method. Discharge the battery completely and recharge it again.

Detailed steps: Find two wires and connect a small 1.5-volt bulb. Connect the two ends of the wire to the positive and negative terminals of the battery. After connecting, the light bulb will emit some shimmer. Wait until the light bulb is completely extinguished and recharge. This can also be changed. Battery performance. But this method is not very effective, but it is still somewhat useful.

Populary Sale Recommendation

Tablet battery:

Amazon 26S1014 tablet battery replacement 58-000219 HD26S1014-A-H(1ICP4/100/118)

Lenovo ideapad yoga series tablet battery L15L3PB0

L16D2P31 battery for Lenovo tab4 plus

TOSHIBA Portege android tablet battery PA5137U

LG G PAD series PC tablet battery BL-T18

Laptop battery:

Lenovo ThinkPad P70 laptop battery 00HW030

HP laptop battery SE03XL replacement 849568-421 849908-850

Lenovo YOGA 11E notebook battery for SB10K97595

Samsung ATIV Book 8 laptop series battery AA-PLVN8NP

ASUS Q501L series laptop battery model C41-N541

Medion Akoya Erazer series laptop battery A41-D17

 

cellphone battery

ASUS ZENFONE 4 smartphone battery C11P1618

Alcatel cellphone BATTERY TLP038B1

Google Pixel 3 cellphone battery G013A-B

iPhone 5S & 5C smartphone battery model apple 616 0721

Lenovo Vibe series mobile phone battery BL262

 

 

Other battery

4.4ah / 36V VICTPOWER 10S2P18650 Li-Battery for Smart Balance Wheel

LOGITECH L-LU18 Lion Rechargeable battery for Harmony Remote 1000 1100 NR

Garmin Driveluxe 50 battery 820mAh for 361-00056-21 1ICP6/35/50

Honeywell BAT-SCN01 BATTERY 2400mAh 3.75V

Nautiz X8 li-ion battery replacement BP14-001200 NX8-1004

ARLO PRO or PRO 2 Camera battery A-1

NETGEAR battery W-10A for NightHawk Router/Modem M1 MR1100

 

power adapter &  PC PSU

LG 34-Inch Ultra Wide QHD Monitor power 19v adapter replacement LCAP31 EAY62949001 EAY63128702

LG gram laptop 19v adapter EAY65249101 replacement ADS-48MS-19-2 19048E 

310W HP ProDesk PC PCG007 POWER SUPPLY

10:57 6.9.2019 - 0 Kommentare

Max performance battery replacement - HOMTOM S8 cellphone battery 3400mAh /12.92WH 3.8V. Shopping S8 battery online, more discount and money-saving. Check your HOMTOM model before you order S8 mobile phone battery service. Cost-effective battery replacement, please visit www.batteryclub.org for more information.

ECN11074_Te

  • Brand : HOMTOM Battery

  • Type : Li-ion

  • Capacity : 3400mAh /12.92WH

  • Volatge : 3.8V

  • Charge limit voltage:4.35VIs there no battery model you find? Take it easy! Contact us fast with your e-mail for what battery models your are looking for. 

    Email: info@batteryclub.org

HOMTOM S8 Mobile phone battery repair tips

1. Refrigerator freezing method. Wrap the battery in paper, then wrap it in plastic wrap and put it into the frozen layer for about 3 days. After taking it out, place it in a cool place and let it dry for two days. Try charging again.

Explanation: The process of using the mobile phone is a process of charging and discharging the battery, and the negative and positive charges in the battery collide with each other. The reason why it is more and more unreliable and troublesome is that at normal temperature, the kinetic energy of the electron is relatively large, the battery is in an active state, and the leakage is relatively frequent. When the battery is in a low temperature environment, the structure of the lithium film and the electrolyte on the surface does not change much, and the interface thereof changes significantly. The leakage current and the like are reduced, and the standby time is increased.

2. Rubber wipe method. Using a clean eraser to wipe the metal surface of the phones battery and the phone can also improve the use.

Explanation: For a long time, the metal surface of the battery has a certain degree of oxidation, resulting in poor contact and short use time, while the rubber enamel can erase the oxide layer on the surface to make the contact better. This method is more suitable for situations where the problem is not very serious.

3. Recharge the activation method. Discharge the battery completely and recharge it again.

Detailed steps: Find two wires and connect a small 1.5-volt bulb. Connect the two ends of the wire to the positive and negative terminals of the battery. After connecting, the light bulb will emit some shimmer. Wait until the light bulb is completely extinguished and recharge. This can also be changed. Battery performance. But this method is not very effective, but it is still somewhat useful.

Populary Sale Recommendation

Tablet battery:

Amazon 26S1014 tablet battery replacement 58-000219 HD26S1014-A-H(1ICP4/100/118)

Lenovo ideapad yoga series tablet battery L15L3PB0

L16D2P31 battery for Lenovo tab4 plus

TOSHIBA Portege android tablet battery PA5137U

LG G PAD series PC tablet battery BL-T18

Laptop battery:

Lenovo ThinkPad P70 laptop battery 00HW030

HP laptop battery SE03XL replacement 849568-421 849908-850

Lenovo YOGA 11E notebook battery for SB10K97595

Samsung ATIV Book 8 laptop series battery AA-PLVN8NP

ASUS Q501L series laptop battery model C41-N541

Medion Akoya Erazer series laptop battery A41-D17

 

cellphone battery

ASUS ZENFONE 4 smartphone battery C11P1618

Alcatel cellphone BATTERY TLP038B1

Google Pixel 3 cellphone battery G013A-B

iPhone 5S & 5C smartphone battery model apple 616 0721

Lenovo Vibe series mobile phone battery BL262

 

 

Other battery

4.4ah / 36V VICTPOWER 10S2P18650 Li-Battery for Smart Balance Wheel

LOGITECH L-LU18 Lion Rechargeable battery for Harmony Remote 1000 1100 NR

Garmin Driveluxe 50 battery 820mAh for 361-00056-21 1ICP6/35/50

Honeywell BAT-SCN01 BATTERY 2400mAh 3.75V

Nautiz X8 li-ion battery replacement BP14-001200 NX8-1004

ARLO PRO or PRO 2 Camera battery A-1

NETGEAR battery W-10A for NightHawk Router/Modem M1 MR1100

 

power adapter &  PC PSU

LG 34-Inch Ultra Wide QHD Monitor power 19v adapter replacement LCAP31 EAY62949001 EAY63128702

LG gram laptop 19v adapter EAY65249101 replacement ADS-48MS-19-2 19048E 

310W HP ProDesk PC  PCG007 POWER SUPPLY

10:56 6.9.2019 - 0 Kommentare

Maximum transmission power supply replacement - Dell L350AM-00 pc power supply 350W. L350AM-00 power supplies are compatible with Dell XPS 8910 8500 8700 8920. Shopping L350AM-00 pc power online, more discount and money-saving. Check your Dell output power and voltage(Ref 80Plus) before you order L350AM-00 pc PSU service. Cost-effective computer power supply charging replacement, please visit www.batteryclub.org for more information.

DEL17628_Se

  • Brand : Dell power supply

  • Input Voltage : 100-240V~/5A 50-60 Hz

  • Ouput Volatge : 350WIs there no power supply model you find? Take it easy! Contact us fast with your e-mail for what PC power models your are looking for. 

    Email: info@batteryclub.org

L350AM-00 replacement model:

PS-6351-6DF AC350AM-00 15D8R

Compatiblet with Dell XPS 8910 8500 8700 8920:

SWITHING POWER SUPPLYSHALL NOT EXCEED 350W350W Power supplyModel: L350AM-00P/N: PS-6351-6DFConnectors(1) 24 Pin Power Connector(1) 4 Pin Power Connector(1) SATA Connectors(1) Mini SATA Connector(1) 6 Pin PCIe Power ConnectorFor Dell XPS 8910 8920For Dell XPS 8000 8100 8500 8700

How to maintain Dell L350AM-00 computer power supply

1. Remove the fan. Disconnect the main power supply first, and unplug the input and output cables on the back of the power supply. Next, unplug and connect all the accessories connected to the power supply, remove the fixing screws of the power supply box, and take out the power supply box. Observe the appearance of the power supply box, remove the screws reasonably and accurately, and remove the cover. When taking the cover, the wires should be pulled out according to the gap at the same time. Remove the four screws that secure the fan and remove the fan. You can not solder the two power cables temporarily.2. Clean the dust. After separating the power supply board and the fan with cardboard, use a small brush or a damp cloth to wipe the dust and wipe it clean. It is also possible to use dust from the fan to blow fan blades and bearings.3. Add lubricant. Peel off the sticker and use a needle-nose pliers to pick out the rubber seal. Find the motor bearing, add lubricant, and when you use the fan to move the fan, make the lubricant flow evenly along the bearing, then add a few drops. Pay attention to whether the fan of the ball bearing has two bearings. Don't neglect the oil feeding to the bearing on the wind side. The oil can't be placed on the main shaft only. Lubricating oils must use computer-specific lubricants or advanced lightweight sewing machine oils. Never use the lubricants used in automobiles. Finally, install the rubber sealing sheet and label it.

Populary Sale Recommendation

Tablet battery:

Amazon 26S1014 tablet battery replacement 58-000219 HD26S1014-A-H(1ICP4/100/118)

Lenovo ideapad yoga series tablet battery L15L3PB0

L16D2P31 battery for Lenovo tab4 plus

TOSHIBA Portege android tablet battery PA5137U

LG G PAD series PC tablet battery BL-T18

Laptop battery:

Lenovo ThinkPad P70 laptop battery 00HW030

HP laptop battery SE03XL replacement 849568-421 849908-850

Lenovo YOGA 11E notebook battery for SB10K97595

Samsung ATIV Book 8 laptop series battery AA-PLVN8NP

ASUS Q501L series laptop battery model C41-N541

Medion Akoya Erazer series laptop battery A41-D17

 

cellphone battery

ASUS ZENFONE 4 smartphone battery C11P1618

Alcatel cellphone BATTERY TLP038B1

Google Pixel 3 cellphone battery G013A-B

iPhone 5S & 5C smartphone battery model apple 616 0721

Lenovo Vibe series mobile phone battery BL262

 

 

Other battery

4.4ah / 36V VICTPOWER 10S2P18650 Li-Battery for Smart Balance Wheel

LOGITECH L-LU18 Lion Rechargeable battery for Harmony Remote 1000 1100 NR

Garmin Driveluxe 50 battery 820mAh for 361-00056-21 1ICP6/35/50

Honeywell BAT-SCN01 BATTERY 2400mAh 3.75V

Nautiz X8 li-ion battery replacement BP14-001200 NX8-1004

ARLO PRO or PRO 2 Camera battery A-1

NETGEAR battery W-10A for NightHawk Router/Modem M1 MR1100

 

power adapter &  PC PSU

LG 34-Inch Ultra Wide QHD Monitor power 19v adapter replacement LCAP31 EAY62949001 EAY63128702

LG gram laptop 19v adapter EAY65249101 replacement ADS-48MS-19-2 19048E 

310W HP ProDesk PC  PCG007 POWER SUPPLY

10:55 6.9.2019 - 0 Kommentare

Max performance battery replacement - CUBOT GT95 cellphone battery 1350mAh/4.995WH 3.7V. Shopping GT95 battery online, more discount and money-saving. Check your CUBOT model before you order GT95 mobile phone battery service. Cost-effective battery replacement, please visit www.batteryclub.org for more information.

ECN11073_Te

CUBOT GT95 Mobile phone battery repair tips

1. Refrigerator freezing method. Wrap the battery in paper, then wrap it in plastic wrap and put it into the frozen layer for about 3 days. After taking it out, place it in a cool place and let it dry for two days. Try charging again.

Explanation: The process of using the mobile phone is a process of charging and discharging the battery, and the negative and positive charges in the battery collide with each other. The reason why it is more and more unreliable and troublesome is that at normal temperature, the kinetic energy of the electron is relatively large, the battery is in an active state, and the leakage is relatively frequent. When the battery is in a low temperature environment, the structure of the lithium film and the electrolyte on the surface does not change much, and the interface thereof changes significantly. The leakage current and the like are reduced, and the standby time is increased.

2. Rubber wipe method. Using a clean eraser to wipe the metal surface of the phones battery and the phone can also improve the use.

Explanation: For a long time, the metal surface of the battery has a certain degree of oxidation, resulting in poor contact and short use time, while the rubber enamel can erase the oxide layer on the surface to make the contact better. This method is more suitable for situations where the problem is not very serious.

3. Recharge the activation method. Discharge the battery completely and recharge it again.

Detailed steps: Find two wires and connect a small 1.5-volt bulb. Connect the two ends of the wire to the positive and negative terminals of the battery. After connecting, the light bulb will emit some shimmer. Wait until the light bulb is completely extinguished and recharge. This can also be changed. Battery performance. But this method is not very effective, but it is still somewhat useful.

Populary Sale Recommendation

Tablet battery:

Amazon 26S1014 tablet battery replacement 58-000219 HD26S1014-A-H(1ICP4/100/118)

Lenovo ideapad yoga series tablet battery L15L3PB0

L16D2P31 battery for Lenovo tab4 plus

TOSHIBA Portege android tablet battery PA5137U

LG G PAD series PC tablet battery BL-T18

Laptop battery:

Lenovo ThinkPad P70 laptop battery 00HW030

HP laptop battery SE03XL replacement 849568-421 849908-850

Lenovo YOGA 11E notebook battery for SB10K97595

Samsung ATIV Book 8 laptop series battery AA-PLVN8NP

ASUS Q501L series laptop battery model C41-N541

Medion Akoya Erazer series laptop battery A41-D17

 

cellphone battery

ASUS ZENFONE 4 smartphone battery C11P1618

Alcatel cellphone BATTERY TLP038B1

Google Pixel 3 cellphone battery G013A-B

iPhone 5S & 5C smartphone battery model apple 616 0721

Lenovo Vibe series mobile phone battery BL262

 

 

Other battery

4.4ah / 36V VICTPOWER 10S2P18650 Li-Battery for Smart Balance Wheel

LOGITECH L-LU18 Lion Rechargeable battery for Harmony Remote 1000 1100 NR

Garmin Driveluxe 50 battery 820mAh for 361-00056-21 1ICP6/35/50

Honeywell BAT-SCN01 BATTERY 2400mAh 3.75V

Nautiz X8 li-ion battery replacement BP14-001200 NX8-1004

ARLO PRO or PRO 2 Camera battery A-1

NETGEAR battery W-10A for NightHawk Router/Modem M1 MR1100

 

power adapter &  PC PSU

LG 34-Inch Ultra Wide QHD Monitor power 19v adapter replacement LCAP31 EAY62949001 EAY63128702

LG gram laptop 19v adapter EAY65249101 replacement ADS-48MS-19-2 19048E 

310W HP ProDesk PC  PCG007 POWER SUPPLY

10:54 6.9.2019 - 0 Kommentare

Maximum transmission power supply replacement - Dell AC350AM-00 pc power supply 350W. AC350AM-00 power supplies are compatible with Dell XPS 8920 8910 8500 8700. Shopping AC350AM-00 pc power online, more discount and money-saving. Check your Dell output power and voltage(Ref 80Plus) before you order AC350AM-00 pc PSU service. Cost-effective computer power supply charging replacement, please visit www.batteryclub.org for more information.

DEL17628_Se_1

  • Brand : Dell power supply

  • Input Voltage : 100-240V~/5A 50-60 Hz

  • Ouput Volatge : 350WIs there no power supply model you find? Take it easy! Contact us fast with your e-mail for what PC power models your are looking for. 

    Email: info@batteryclub.org

AC350AM-00 replacement model:

PS-6351-6DF AC350AM-00 15D8R

Compatiblet with Dell XPS 8920 8910 8500 8700:

SWITHING POWER SUPPLYSHALL NOT EXCEED 350W350W Power supplyModel: L350AM-00P/N: PS-6351-6DFConnectors(1) 24 Pin Power Connector(1) 4 Pin Power Connector(1) SATA Connectors(1) Mini SATA Connector(1) 6 Pin PCIe Power ConnectorFor Dell XPS 8910 8920For Dell XPS 8000 8100 8500 8700

How to maintain Dell AC350AM-00 computer power supply

1. Remove the fan. Disconnect the main power supply first, and unplug the input and output cables on the back of the power supply. Next, unplug and connect all the accessories connected to the power supply, remove the fixing screws of the power supply box, and take out the power supply box. Observe the appearance of the power supply box, remove the screws reasonably and accurately, and remove the cover. When taking the cover, the wires should be pulled out according to the gap at the same time. Remove the four screws that secure the fan and remove the fan. You can not solder the two power cables temporarily.2. Clean the dust. After separating the power supply board and the fan with cardboard, use a small brush or a damp cloth to wipe the dust and wipe it clean. It is also possible to use dust from the fan to blow fan blades and bearings.3. Add lubricant. Peel off the sticker and use a needle-nose pliers to pick out the rubber seal. Find the motor bearing, add lubricant, and when you use the fan to move the fan, make the lubricant flow evenly along the bearing, then add a few drops. Pay attention to whether the fan of the ball bearing has two bearings. Don't neglect the oil feeding to the bearing on the wind side. The oil can't be placed on the main shaft only. Lubricating oils must use computer-specific lubricants or advanced lightweight sewing machine oils. Never use the lubricants used in automobiles. Finally, install the rubber sealing sheet and label it.

Populary Sale Recommendation

Tablet battery:

Amazon 26S1014 tablet battery replacement 58-000219 HD26S1014-A-H(1ICP4/100/118)

Lenovo ideapad yoga series tablet battery L15L3PB0

L16D2P31 battery for Lenovo tab4 plus

TOSHIBA Portege android tablet battery PA5137U

LG G PAD series PC tablet battery BL-T18

Laptop battery:

Lenovo ThinkPad P70 laptop battery 00HW030

HP laptop battery SE03XL replacement 849568-421 849908-850

Lenovo YOGA 11E notebook battery for SB10K97595

Samsung ATIV Book 8 laptop series battery AA-PLVN8NP

ASUS Q501L series laptop battery model C41-N541

Medion Akoya Erazer series laptop battery A41-D17

 

cellphone battery

ASUS ZENFONE 4 smartphone battery C11P1618

Alcatel cellphone BATTERY TLP038B1

Google Pixel 3 cellphone battery G013A-B

iPhone 5S & 5C smartphone battery model apple 616 0721

Lenovo Vibe series mobile phone battery BL262

 

 

Other battery

4.4ah / 36V VICTPOWER 10S2P18650 Li-Battery for Smart Balance Wheel

LOGITECH L-LU18 Lion Rechargeable battery for Harmony Remote 1000 1100 NR

Garmin Driveluxe 50 battery 820mAh for 361-00056-21 1ICP6/35/50

Honeywell BAT-SCN01 BATTERY 2400mAh 3.75V

Nautiz X8 li-ion battery replacement BP14-001200 NX8-1004

ARLO PRO or PRO 2 Camera battery A-1

NETGEAR battery W-10A for NightHawk Router/Modem M1 MR1100

 

power adapter &  PC PSU

LG 34-Inch Ultra Wide QHD Monitor power 19v adapter replacement LCAP31 EAY62949001 EAY63128702

LG gram laptop 19v adapter EAY65249101 replacement ADS-48MS-19-2 19048E 

310W HP ProDesk PC  PCG007 POWER SUPPLY

08:21 28.8.2019 - 0 Kommentare

TOSHIBA PA5242U-1BRS battery is compatible with Toshiba Satellite Radius laptops. PA5242U-1BRS battery is 3655mAh and 11.4v. This battery model of PA5242U-1BRS is 30% off(if YOU buy in bulk, discount more), max performance and secure quality. Your PA5242U-1BRS gets 1-year warranty-service and 30-days money-back guarantee at www.batteryclub.org.

Brand :Toshiba

Capacity :3655mAh

Voltage :11.4V

Chemisty :Li-ion

Replaceability with the following models:

product compatibility:

Toshiba Satellite P20W-C Series

Toshiba Satellite Radius 12 P20W-C Series

Toshiba Satellite Radius 12 P20W-C-103

Toshiba Satellite Radius 12 P20W-C-109

Toshiba Satellite Radius 12 P20W-C-10H

Toshiba Satellite Radius 12 P20W-C-104

Toshiba Satellite Radius 12 P20W-C-10C

Toshiba Satellite Radius 12 P20W-C-10K

Toshiba Satellite Radius 12 P20W-C-106

Toshiba Satellite Radius 12 P20W-C-10D

Toshiba Satellite Radius P25W-C Series

Why the laptop can't be charged

1. The laptop battery management software disables the charging function.

2. Laptop battery aging or daily careless maintenance, often use the battery power to exhaust until the computer automatically shuts down. In fact, this is very easy to damage the battery.

3. Some users will take out the laptop battery for a long time, put it away, this kind of battery will be taken down and stored, it will also lose the battery, which will make the battery life of the laptop worse and worse.

PA5242U-1BRS Notebook battery charging shows 0% available power is turned on and can not be charged solution

1. Check if the battery charging is disabled. If the user sets the laptop battery, the laptop battery management software disables the charging function

2. If there is no problem with the check settings, if the laptop battery is used for a long time, the over-discharge will cause 0% of the available power is turned on and not charged. If it is taken for repair, even if it is repaired, there will be problems such as battery life and long life. It is best to buy. Replace with a new laptop battery.

3. The battery has been used for too long, it is useless, resulting in poor contact, it is recommended to open the notebook clear gray, plug the power cord battery to try.

4. notebook win7 system battery internal control circuit or battery core problems, need to take over.

Here, we provide other products for your reference:

HBC BA225030 2100MAH 6V

HBC BA225030 1500mah 6V

HBC QD109300 24V

HP PCG007 100-240V~,50-60Hz 4.0A 310W +12.0Vmain==16A +12Vcpu ==16A

Lenovo 45N1110 24Wh 11.1V/11.4V

Huawei HB512627ECW 410MAH 3.82V

Lenovo L15D1P31 4000mAh 3.8V

Huawei HB442528EBC 300MAH 3.8V

CRAFTSMAN CMCB6050 500mah 60V

Acer AS16B5J 5600mAh 11.1V

Toshiba PA5173U-1BRS 5200mAh 3.75V

Fujitsu FMVNBP212 2200mAh 10.8V

08:17 28.8.2019 - 0 Kommentare

MEDION A41-D170 battery is compatible with Medion Akoya laptops. A41-D170 battery is 3000mAh/45Wh and 15v. This battery model of A41-D170 is 30% off(if YOU buy in bulk, discount more), max performance and secure quality. Your A41-D170 gets 1-year warranty-service and 30-days money-back guarantee at www.batteryclub.org.

Brand :Medion

Capacity :3000mAh/45Wh

Voltage :15V

Product color :Black

Chemisty :Li-ion.

Replaceability with the following models:

product compatibility:

for Medion laptops

Medion Akoya E7415

Medion Akoya E7415T

Medion Akoya E7419

Medion Akoya E7416

Medion Akoya E7641

Medion Akoya E7641(MD99854)

Medion Akoya E7641(MD99854)

Medion Akoya E7643

Medion Erazer P7647

Why the laptop can't be charged

1. The laptop battery management software disables the charging function.

2. Laptop battery aging or daily careless maintenance, often use the battery power to exhaust until the computer automatically shuts down. In fact, this is very easy to damage the battery.

3. Some users will take out the laptop battery for a long time, put it away, this kind of battery will be taken down and stored, it will also lose the battery, which will make the battery life of the laptop worse and worse.

A41-D17 Notebook battery charging shows 0% available power is turned on and can not be charged solution

1. Check if the battery charging is disabled. If the user sets the laptop battery, the laptop battery management software disables the charging function

2. If there is no problem with the check settings, if the laptop battery is used for a long time, the over-discharge will cause 0% of the available power is turned on and not charged. If it is taken for repair, even if it is repaired, there will be problems such as battery life and long life. It is best to buy. Replace with a new laptop battery.

3. The battery has been used for too long, it is useless, resulting in poor contact, it is recommended to open the notebook clear gray, plug the power cord battery to try.

4. notebook win7 system battery internal control circuit or battery core problems, need to take over.

Here, we provide other products for your reference:

HBC BA225030 2100MAH 6V

HBC BA225030 1500mah 6V

HBC QD109300 24V

HP PCG007 100-240V~,50-60Hz 4.0A 310W +12.0Vmain==16A +12Vcpu ==16A

Lenovo 45N1110 24Wh 11.1V/11.4V

Huawei HB512627ECW 410MAH 3.82V

Lenovo L15D1P31 4000mAh 3.8V

Huawei HB442528EBC 300MAH 3.8V

CRAFTSMAN CMCB6050 500mah 60V

Acer AS16B5J 5600mAh 11.1V

Toshiba PA5173U-1BRS 5200mAh 3.75V

Fujitsu FMVNBP212 2200mAh 10.8V

08:12 28.8.2019 - 0 Kommentare

This battery model of SAMSUNG SM-T900 is 30% off(if YOU buy in bulk, discount more), max performance and secure quality. Your SM-T900 gets 1-year warranty-service and 30-days money-back guarantee at www.batteryclub.org.

Brand :Samsung

Capacity :9500mah

Voltage :3.8V

Product color :white

Replaceability with the following models:

product compatibility:

P900 P901 P905 T9500C

How does the new tablet charge correctly for the first time?

1. Charge the battery for 2-3 hours after the first three times of full charge, then use it every time it is fully charged. Note: Do not charge the battery after it is completely exhausted, which will affect the battery life.

2. Do not use the tablet for a long time during the charging process. Please wait for the operation panel after charging is completed.

SAMSUNG SM-T900 Tablet battery tips

1. Do not over discharge. When the device prompts “The battery is low”, it should be charged; until the device is automatically turned off, it will be charged, and the battery has been over-discharged. This can affect battery life.

2. Do not overcharge. When the charger is full, you should unplug the charger. Nowadays, the charger generally has a design that is full of self-stopping. It is no problem to remove the battery from the charger for a short time, but the battery is left on the charger for a long time, and the voltage of the grid rises late at night, the charger that has stopped charging. After the voltage rises, it will continue to charge, causing the battery to be overcharged. This can affect battery life.

What if the tablet does not charge?

1. First we have to make sure that the connection between the tablet and the charging device is connected.

2. We have to confirm the problem of the connection line, try to replace a connection line.

3. We confirm whether it is a problem with the power supply charging transformer, replace the power supply charging transformer.

4. We check whether it is caused by the software. After we back up the data, we will reset the tablet and ipad, restore and restore to the factory settings.

5. If all of the above are ok, we can only send it to see if it is a battery problem or a problem at other interfaces.

Here, we provide other products for your reference:

HBC BA225030 2100MAH 6V

HBC BA225030 1500mah 6V

HBC QD109300 24V

HP PCG007 100-240V~,50-60Hz 4.0A 310W +12.0Vmain==16A +12Vcpu ==16A

Lenovo 45N1110 24Wh 11.1V/11.4V

Huawei HB512627ECW 410MAH 3.82V

Lenovo L15D1P31 4000mAh 3.8V

Huawei HB442528EBC 300MAH 3.8V

CRAFTSMAN CMCB6050 500mah 60V

Acer AS16B5J 5600mAh 11.1V

Toshiba PA5173U-1BRS 5200mAh 3.75V

Fujitsu FMVNBP212 2200mAh 10.8V

08:06 28.8.2019 - 0 Kommentare

NETGEAR W-10A battery is compatible with Netgear NightHawk Router/Modem M1 MR1100. W-10A battery is 5040mAh/19.78WH and 3.85v. This battery model of W-10A is 30% off(if YOU buy in bulk, discount more), max performance and secure quality. Your W-10A gets 1-year warranty-service and 30-days money-back guarantee at www.batteryclub.org.

Brand : Netgear

Capacity : 5040mAh/19.78WH

Voltage : 3.85V

Product color : Black

Chemisty : Li-ion

Replaceability with the following models:

product compatibility:

Netgear NightHawk Router/Modem M1 MR1100

Common sense and usage precautions for various types of batteries

1. Calculation of charging time. The battery charging formula is generally: Charging time (hours) = charging battery capacity (mAh) / charging current (mA) * 1.5 coefficient.If you use a 1000mAh rechargeable battery and the charger is charged with 200mA, the charging time is: 1000/200*1.5=7.5 hours.2. The lead-acid battery battery does not need to be discharged before charging. Because it has no memory effect, it can be directly charged regardless of the state of charge of the battery, without discharging.3. The battery should be recharged. The shallower the discharge, the greater the number of cycles. Therefore, according to this theory, the charging is beneficial to the cycle life. However, in terms of the chargers that are widely used in the market, the charger has a high failure rate and poor reliability due to price factors and technical levels. Defects such as low precision. Therefore, sometimes charging will affect the battery life. The battery is emptied and recharged. Although the number of charging times is reduced, some single-cell over-discharge may occur due to the difference between the single-cell batteries during discharge. The over-discharge battery charging acceptance capability will be greatly reduced, causing insufficient charging failure. Since the battery is recharged after being discharged, the charger has a heavy load for a long time and is liable to damage the charger. Therefore, in combination with the above, we believe that it is more reasonable to perform a charge when the battery discharges 50-70% of the power, which is beneficial to the use of the battery.4. Pay attention to the effect of temperature on battery performance. When the battery is charged or discharged, an electrochemical reaction occurs on the battery electrode. The higher the temperature, the activity of each active material of the battery increases, the viscosity of the electrolyte decreases, and the electrical resistance decreases, so that the electrochemical reaction is easy to proceed, and vice versa. . The lower the temperature during discharge, the lower the discharge capacity. At a particularly low temperature, the discharge capacity will decrease drastically, and the higher the temperature is reversed. The lower the temperature during charging, the worse the charge acceptance capability, and the higher the charge voltage is required. Electricity.5. The newly purchased battery should be charged before using it. In order to prevent accidents during transportation, rechargeable batteries are generally not fully charged. And the battery has the characteristics of self-discharge, so it will carry 30%-50% capacity guarantee voltage when shipped. Generally shipped batteries will guarantee a storage period of about 6 months. Because the battery is not fully charged, the customer may have stored it and stored it for a period of time when it was purchased. Therefore, if the battery that was just bought is used for large discharge, it may cause damage. It is recommended to use it after it is full.6. The battery should pay attention to the storage conditions. Since long-term storage accelerates the self-discharge of the battery and reduces the reactivity, the temperature is preferably suitable for long-term storage at 10 ° C to 30 ° C. When the battery needs to be stored for more than one year, it is necessary to ensure that the battery is charged and discharged at least once a year, which can prevent the battery from leaking alkali and the battery performance degradation caused by self-discharge of the battery.When the battery is stored for a long time after the long-term storage, the battery voltage is high and the capacity is reduced due to a decrease in the internal reactivity of the battery. After repeated small current charging and discharging, the capacity can be restored.7. Do not combine batteries of different capacities. Mixing different capacities or old and new batteries may cause leakage, zero voltage, etc. This is due to the difference in capacity during charging, some batteries are overcharged during charging, some batteries are not fully charged, and batteries with high capacity are not discharged when discharged, while those with low capacity are over-discharged. In such a vicious circle, the battery is damaged and leaks or low (zero) voltage.8. Do not store the battery in the appliance after it has been used or not used for a long time. If the appliance is no longer used for a long period of time, it is best to take the battery out and put it in a cool, dry place. If this is not the case, the appliance will be turned off and the system will still have a low current output, which will shorten Battery life.9. Do not over discharge or overcharge the battery. After the battery has discharged the internal stored power, after the voltage reaches a certain value, the discharge will continue to cause overdischarge, and the discharge cutoff voltage is usually determined according to the discharge current. 0.2C-2C discharge is generally set to 1.0V / support, above 3C is 0.8V / support (such as battery capacity is 2000mAH, 0.2C = 0.2 * 2000 = 400mAH), battery over discharge may have catastrophic consequences for the battery In particular, high current over-discharge, or repeated over-discharge, has a greater impact on the battery. In general, over-discharge will increase the internal pressure of the battery, and the reversibility of the positive and negative active materials will be destroyed. Even if the charging is only partially restored, the capacity will be significantly attenuated.    Overcharge refers to the behavior of the battery to continue charging after a certain charging process is fully charged. Under normal circumstances, the internal pressure of the battery will not increase significantly, but if the charging current is too large, or the charging time is too long, the generated oxygen can not be consumed, it may cause the internal pressure to rise, the battery is deformed, the liquid leakage, etc. phenomenon. At the same time, its electrical performance will be significantly reduced.

Here, we provide other products for your reference:

HBC BA225030 2100MAH 6V

HBC BA225030 1500mah 6V

HBC QD109300 24V

HP PCG007 100-240V~,50-60Hz 4.0A 310W +12.0Vmain==16A +12Vcpu ==16A

Lenovo 45N1110 24Wh 11.1V/11.4V

Huawei HB512627ECW 410MAH 3.82V

Lenovo L15D1P31 4000mAh 3.8V

Huawei HB442528EBC 300MAH 3.8V

CRAFTSMAN CMCB6050 500mah 60V

Acer AS16B5J 5600mAh 11.1V

Toshiba PA5173U-1BRS 5200mAh 3.75V

Fujitsu FMVNBP212 2200mAh 10.8V

11:22 15.8.2019 - 0 Kommentare

Shop special offers Nokia HE330 batteries 2300mah 3.8v, compatible with Nokia 330. Best service, comfortable shopping! 1-year warranty, 30-days money back!

ECN10603_Te

  • Brand : Nokia Battery

  • Type : Li-ion

  • Capacity : 2630MAH

  • Volatge : 4.4V

HE330 Replaceable universal battery model:

HE330

Perfectly compatible with Nokia 330:

For Nokia 330

Nokia HE330 Mobile phone battery repair tips

1. Refrigerator freezing method. Wrap the battery in paper, then wrap it in plastic wrap and put it into the frozen layer for about 3 days. After taking it out, place it in a cool place and let it dry for two days. Try charging again.

Explanation: The process of using the mobile phone is a process of charging and discharging the battery, and the negative and positive charges in the battery collide with each other. The reason why it is more and more unreliable and troublesome is that at normal temperature, the kinetic energy of the electron is relatively large, the battery is in an active state, and the leakage is relatively frequent. When the battery is in a low temperature environment, the structure of the lithium film and the electrolyte on the surface does not change much, and the interface thereof changes significantly. The leakage current and the like are reduced, and the standby time is increased.

2. Rubber wipe method. Using a clean eraser to wipe the metal surface of the phone's battery and the phone can also improve the use.

Explanation: For a long time, the metal surface of the battery has a certain degree of oxidation, resulting in poor contact and short use time, while the rubber enamel can erase the oxide layer on the surface to make the contact better. This method is more suitable for situations where the problem is not very serious.

3. Recharge the activation method. Discharge the battery completely and recharge it again.

Detailed steps: Find two wires and connect a small 1.5-volt bulb. Connect the two ends of the wire to the positive and negative terminals of the battery. After connecting, the light bulb will emit some shimmer. Wait until the light bulb is completely extinguished and recharge. This can also be changed. Battery performance. But this method is not very effective, but it is still somewhat useful.

How to use the HE330 battery correctly

1. Do not run out of battery power and then recharge. Nowadays, smart phones use lithium-ion polymer batteries, which have no so-called "memory effect" in nickel-cadmium batteries, so there is no need to run out of batteries and recharge them. In fact, if the lithium battery is in a low voltage state for a long time, it will cause the phenomenon that charging cannot occur. So when the phone's power drops to less than 20%, it should be charged. Therefore, if the mobile phone is not used for a long time, it should be kept at full power as much as possible, and it will be charged for a while.

2. Do not continue charging for a long time after the phone is fully charged. Many people like to charge while sleeping, and then unplug the charger the next day. In this way, the phone will automatically stop charging after the battery is fully charged. However, during the charging process, the battery is overheated, and even the burning takes place during charging. We should try to avoid charging the phone for a long time without being guarded.

3. Don't play the phone while charging. Nowadays, the computing power of smart phones is very powerful. Nowadays, the power to play games with mobile phones is even greater. However, due to the limitation of the internal space of mobile phones, it is impossible to install cooling devices such as fans. Even if the copper pipes are cooled, they may not be as thorough as PCs. Therefore, we should try to avoid overheating in the process of using the smartphone. If you play mobile games at this time, the heat generated by the battery and the processor will be superimposed. In the long run, irreversible damage is caused to the components inside the battery and even the mobile phone. Therefore, it is not necessary to use the mobile phone as much as possible while charging.

4. Do not charge your phone on the sofa/bed. As mentioned before, fever is the culprit that shortens the battery life of mobile phones, and the mobile phone can only self-heat. If you charge on the sofa or bed, it will cause the heat of the fuselage to accumulate, causing local overheating. In addition, the sofa, bed sheets and cotton wadding are all flammable. At this time, if an accident occurs, the possibility of fire will be great.

5. Do not use the computer USB interface to charge the phone. Many people, including myself, use the USB interface of the computer to charge the phone for convenience. However, the USB interface current of many computers is less than 500mA, and the process of charging the mobile phone will be very long. What's more, the power supply mechanism of some computer motherboards is not perfect. If a variety of USB devices are connected or plugged in at the same time, the output current of the USB interface will be unstable, which is not conducive to the long-term use of the smart phone battery.

6. Do not use the charging treasure to charge the phone for a long time. Although many charging treasures can provide high current charging of more than 1A or even 2.1A, charging treasure is not a power supply after all, and cannot guarantee continuous output of voltage/current. In addition, the charging treasure itself will generate a certain amount of heat when charging the mobile phone, so it is not recommended to use the charging treasure for charging the mobile phone for a long time, and it can only be used as an emergency.

7. Do not use the phone for a long time in the case of too cold. Lithium batteries are not only afraid of heat, but also cold. In a cold environment, the activity of lithium battery and the lithium intercalation activity of the negative active material will be affected, and the battery capacity will decrease and the rate performance will decrease. When used at lower temperature conditions, lithium dendrites are formed on the surface of the negative electrode in severe cases, piercing the diaphragm and causing a safety accident. Android phones will also have a significantly shorter battery life at lower temperatures.

Here, we provide other products for your reference:

HBC BA225030 2100MAH 6V battery

HBC BA225030 1500mah 6V battery

HBC QD109300 24V ac adapter

HP PCG007 310W power supply 

Microsoft G3HTA001H 8030mAh/60.8Wh battery

Lenovo 45N1110 battery 24Wh 11.1V/11.4V

Huawei HB512627ECW battery 410MAH 3.82V

Lenovo L15D1P31 battery 4000mAh 3.8V

Huawei HB442528EBC battery 300MAH 3.8V

CRAFTSMAN CMCB6050 500mah/60V battery

Acer AS16B5J 5600mAh battery

Toshiba PA5173U-1BRS 5200mAh battery

Fujitsu FMVNBP212 2200mAh battery

11:21 15.8.2019 - 0 Kommentare

Shop special offers Asus PS-486490 batteries 2300mah 3.8v, compatible with Asus Pegasus 5000 X005. Best service, comfortable shopping! 1-year warranty, 30-days money back!

ECN10605_Te

  • Brand : Asus Battery

  • Type : Li-ion

  • Capacity : 4850MAH

  • Volatge : 4.4V

PS-486490 Replaceable universal battery model:

PS-486490 ATL_PS-486490

Perfectly compatible with Asus Pegasus 5000 X005:

For Asus Pegasus 5000 X005

Asus PS-486490 Mobile phone battery repair tips

1. Refrigerator freezing method. Wrap the battery in paper, then wrap it in plastic wrap and put it into the frozen layer for about 3 days. After taking it out, place it in a cool place and let it dry for two days. Try charging again.

Explanation: The process of using the mobile phone is a process of charging and discharging the battery, and the negative and positive charges in the battery collide with each other. The reason why it is more and more unreliable and troublesome is that at normal temperature, the kinetic energy of the electron is relatively large, the battery is in an active state, and the leakage is relatively frequent. When the battery is in a low temperature environment, the structure of the lithium film and the electrolyte on the surface does not change much, and the interface thereof changes significantly. The leakage current and the like are reduced, and the standby time is increased.

2. Rubber wipe method. Using a clean eraser to wipe the metal surface of the phone's battery and the phone can also improve the use.

Explanation: For a long time, the metal surface of the battery has a certain degree of oxidation, resulting in poor contact and short use time, while the rubber enamel can erase the oxide layer on the surface to make the contact better. This method is more suitable for situations where the problem is not very serious.

3. Recharge the activation method. Discharge the battery completely and recharge it again.

Detailed steps: Find two wires and connect a small 1.5-volt bulb. Connect the two ends of the wire to the positive and negative terminals of the battery. After connecting, the light bulb will emit some shimmer. Wait until the light bulb is completely extinguished and recharge. This can also be changed. Battery performance. But this method is not very effective, but it is still somewhat useful.

How to use the PS-486490 battery correctly

1. Do not run out of battery power and then recharge. Nowadays, smart phones use lithium-ion polymer batteries, which have no so-called "memory effect" in nickel-cadmium batteries, so there is no need to run out of batteries and recharge them. In fact, if the lithium battery is in a low voltage state for a long time, it will cause the phenomenon that charging cannot occur. So when the phone's power drops to less than 20%, it should be charged. Therefore, if the mobile phone is not used for a long time, it should be kept at full power as much as possible, and it will be charged for a while.

2. Do not continue charging for a long time after the phone is fully charged. Many people like to charge while sleeping, and then unplug the charger the next day. In this way, the phone will automatically stop charging after the battery is fully charged. However, during the charging process, the battery is overheated, and even the burning takes place during charging. We should try to avoid charging the phone for a long time without being guarded.

3. Don't play the phone while charging. Nowadays, the computing power of smart phones is very powerful. Nowadays, the power to play games with mobile phones is even greater. However, due to the limitation of the internal space of mobile phones, it is impossible to install cooling devices such as fans. Even if the copper pipes are cooled, they may not be as thorough as PCs. Therefore, we should try to avoid overheating in the process of using the smartphone. If you play mobile games at this time, the heat generated by the battery and the processor will be superimposed. In the long run, irreversible damage is caused to the components inside the battery and even the mobile phone. Therefore, it is not necessary to use the mobile phone as much as possible while charging.

4. Do not charge your phone on the sofa/bed. As mentioned before, fever is the culprit that shortens the battery life of mobile phones, and the mobile phone can only self-heat. If you charge on the sofa or bed, it will cause the heat of the fuselage to accumulate, causing local overheating. In addition, the sofa, bed sheets and cotton wadding are all flammable. At this time, if an accident occurs, the possibility of fire will be great.

5. Do not use the computer USB interface to charge the phone. Many people, including myself, use the USB interface of the computer to charge the phone for convenience. However, the USB interface current of many computers is less than 500mA, and the process of charging the mobile phone will be very long. What's more, the power supply mechanism of some computer motherboards is not perfect. If a variety of USB devices are connected or plugged in at the same time, the output current of the USB interface will be unstable, which is not conducive to the long-term use of the smart phone battery.

6. Do not use the charging treasure to charge the phone for a long time. Although many charging treasures can provide high current charging of more than 1A or even 2.1A, charging treasure is not a power supply after all, and cannot guarantee continuous output of voltage/current. In addition, the charging treasure itself will generate a certain amount of heat when charging the mobile phone, so it is not recommended to use the charging treasure for charging the mobile phone for a long time, and it can only be used as an emergency.

7. Do not use the phone for a long time in the case of too cold. Lithium batteries are not only afraid of heat, but also cold. In a cold environment, the activity of lithium battery and the lithium intercalation activity of the negative active material will be affected, and the battery capacity will decrease and the rate performance will decrease. When used at lower temperature conditions, lithium dendrites are formed on the surface of the negative electrode in severe cases, piercing the diaphragm and causing a safety accident. Android phones will also have a significantly shorter battery life at lower temperatures.

Here, we provide other products for your reference:

HBC BA225030 2100MAH 6V battery

HBC BA225030 1500mah 6V battery

HBC QD109300 24V ac adapter

HP PCG007 310W power supply 

Microsoft G3HTA001H 8030mAh/60.8Wh battery

Lenovo 45N1110 battery 24Wh 11.1V/11.4V

Huawei HB512627ECW battery 410MAH 3.82V

Lenovo L15D1P31 battery 4000mAh 3.8V

Huawei HB442528EBC battery 300MAH 3.8V

CRAFTSMAN CMCB6050 500mah/60V battery

Acer AS16B5J 5600mAh battery

Toshiba PA5173U-1BRS 5200mAh battery

Fujitsu FMVNBP212 2200mAh battery

11:21 15.8.2019 - 0 Kommentare

Shop special offers Alcatel TLP030JC batteries 2300mah 3.8v, compatible with Alcatel A3 XL 9008j. Best service, comfortable shopping! 1-year warranty, 30-days money back!

ECN10607_Te

  • Brand : Alcatel Battery

  • Type : Li-ion

  • Capacity : 3080MAH

  • Volatge : 4.4V

TLP030JC Replaceable universal battery model:

TLp030JC

Perfectly compatible with Alcatel A3 XL 9008j:

For Alcatel A3 XL 9008j

Alcatel TLP030JC Mobile phone battery repair tips

1. Refrigerator freezing method. Wrap the battery in paper, then wrap it in plastic wrap and put it into the frozen layer for about 3 days. After taking it out, place it in a cool place and let it dry for two days. Try charging again.

Explanation: The process of using the mobile phone is a process of charging and discharging the battery, and the negative and positive charges in the battery collide with each other. The reason why it is more and more unreliable and troublesome is that at normal temperature, the kinetic energy of the electron is relatively large, the battery is in an active state, and the leakage is relatively frequent. When the battery is in a low temperature environment, the structure of the lithium film and the electrolyte on the surface does not change much, and the interface thereof changes significantly. The leakage current and the like are reduced, and the standby time is increased.

2. Rubber wipe method. Using a clean eraser to wipe the metal surface of the phone's battery and the phone can also improve the use.

Explanation: For a long time, the metal surface of the battery has a certain degree of oxidation, resulting in poor contact and short use time, while the rubber enamel can erase the oxide layer on the surface to make the contact better. This method is more suitable for situations where the problem is not very serious.

3. Recharge the activation method. Discharge the battery completely and recharge it again.

Detailed steps: Find two wires and connect a small 1.5-volt bulb. Connect the two ends of the wire to the positive and negative terminals of the battery. After connecting, the light bulb will emit some shimmer. Wait until the light bulb is completely extinguished and recharge. This can also be changed. Battery performance. But this method is not very effective, but it is still somewhat useful.

How to use the TLP030JC battery correctly

1. Do not run out of battery power and then recharge. Nowadays, smart phones use lithium-ion polymer batteries, which have no so-called "memory effect" in nickel-cadmium batteries, so there is no need to run out of batteries and recharge them. In fact, if the lithium battery is in a low voltage state for a long time, it will cause the phenomenon that charging cannot occur. So when the phone's power drops to less than 20%, it should be charged. Therefore, if the mobile phone is not used for a long time, it should be kept at full power as much as possible, and it will be charged for a while.

2. Do not continue charging for a long time after the phone is fully charged. Many people like to charge while sleeping, and then unplug the charger the next day. In this way, the phone will automatically stop charging after the battery is fully charged. However, during the charging process, the battery is overheated, and even the burning takes place during charging. We should try to avoid charging the phone for a long time without being guarded.

3. Don't play the phone while charging. Nowadays, the computing power of smart phones is very powerful. Nowadays, the power to play games with mobile phones is even greater. However, due to the limitation of the internal space of mobile phones, it is impossible to install cooling devices such as fans. Even if the copper pipes are cooled, they may not be as thorough as PCs. Therefore, we should try to avoid overheating in the process of using the smartphone. If you play mobile games at this time, the heat generated by the battery and the processor will be superimposed. In the long run, irreversible damage is caused to the components inside the battery and even the mobile phone. Therefore, it is not necessary to use the mobile phone as much as possible while charging.

4. Do not charge your phone on the sofa/bed. As mentioned before, fever is the culprit that shortens the battery life of mobile phones, and the mobile phone can only self-heat. If you charge on the sofa or bed, it will cause the heat of the fuselage to accumulate, causing local overheating. In addition, the sofa, bed sheets and cotton wadding are all flammable. At this time, if an accident occurs, the possibility of fire will be great.

5. Do not use the computer USB interface to charge the phone. Many people, including myself, use the USB interface of the computer to charge the phone for convenience. However, the USB interface current of many computers is less than 500mA, and the process of charging the mobile phone will be very long. What's more, the power supply mechanism of some computer motherboards is not perfect. If a variety of USB devices are connected or plugged in at the same time, the output current of the USB interface will be unstable, which is not conducive to the long-term use of the smart phone battery.

6. Do not use the charging treasure to charge the phone for a long time. Although many charging treasures can provide high current charging of more than 1A or even 2.1A, charging treasure is not a power supply after all, and cannot guarantee continuous output of voltage/current. In addition, the charging treasure itself will generate a certain amount of heat when charging the mobile phone, so it is not recommended to use the charging treasure for charging the mobile phone for a long time, and it can only be used as an emergency.

7. Do not use the phone for a long time in the case of too cold. Lithium batteries are not only afraid of heat, but also cold. In a cold environment, the activity of lithium battery and the lithium intercalation activity of the negative active material will be affected, and the battery capacity will decrease and the rate performance will decrease. When used at lower temperature conditions, lithium dendrites are formed on the surface of the negative electrode in severe cases, piercing the diaphragm and causing a safety accident. Android phones will also have a significantly shorter battery life at lower temperatures.

Here, we provide other products for your reference:

HBC BA225030 2100MAH 6V battery

HBC BA225030 1500mah 6V battery

HBC QD109300 24V ac adapter

HP PCG007 310W power supply 

Microsoft G3HTA001H 8030mAh/60.8Wh battery

Lenovo 45N1110 battery 24Wh 11.1V/11.4V

Huawei HB512627ECW battery 410MAH 3.82V

Lenovo L15D1P31 battery 4000mAh 3.8V

Huawei HB442528EBC battery 300MAH 3.8V

CRAFTSMAN CMCB6050 500mah/60V battery

Acer AS16B5J 5600mAh battery

Toshiba PA5173U-1BRS 5200mAh battery

Fujitsu FMVNBP212 2200mAh battery

11:21 15.8.2019 - 0 Kommentare

Shop special offers Blu C866640282L batteries 2300mah 3.8v, compatible with Blu Life One XL L050 L050U L050. Best service, comfortable shopping! 1-year warranty, 30-days money back!

ECN10609_Te

  • Brand : Blu Battery

  • Type : Li-ion

  • Capacity : 2820MAH

  • Volatge : 4.35V

C866640282L Replaceable universal battery model:

C866640282L

Perfectly compatible with Blu Life One XL L050 L050U L050:

For Blu Life One XL L050 L050U L050

Blu C866640282L Mobile phone battery repair tips

1. Refrigerator freezing method. Wrap the battery in paper, then wrap it in plastic wrap and put it into the frozen layer for about 3 days. After taking it out, place it in a cool place and let it dry for two days. Try charging again.

Explanation: The process of using the mobile phone is a process of charging and discharging the battery, and the negative and positive charges in the battery collide with each other. The reason why it is more and more unreliable and troublesome is that at normal temperature, the kinetic energy of the electron is relatively large, the battery is in an active state, and the leakage is relatively frequent. When the battery is in a low temperature environment, the structure of the lithium film and the electrolyte on the surface does not change much, and the interface thereof changes significantly. The leakage current and the like are reduced, and the standby time is increased.

2. Rubber wipe method. Using a clean eraser to wipe the metal surface of the phone's battery and the phone can also improve the use.

Explanation: For a long time, the metal surface of the battery has a certain degree of oxidation, resulting in poor contact and short use time, while the rubber enamel can erase the oxide layer on the surface to make the contact better. This method is more suitable for situations where the problem is not very serious.

3. Recharge the activation method. Discharge the battery completely and recharge it again.

Detailed steps: Find two wires and connect a small 1.5-volt bulb. Connect the two ends of the wire to the positive and negative terminals of the battery. After connecting, the light bulb will emit some shimmer. Wait until the light bulb is completely extinguished and recharge. This can also be changed. Battery performance. But this method is not very effective, but it is still somewhat useful.

How to use the C866640282L battery correctly

1. Do not run out of battery power and then recharge. Nowadays, smart phones use lithium-ion polymer batteries, which have no so-called "memory effect" in nickel-cadmium batteries, so there is no need to run out of batteries and recharge them. In fact, if the lithium battery is in a low voltage state for a long time, it will cause the phenomenon that charging cannot occur. So when the phone's power drops to less than 20%, it should be charged. Therefore, if the mobile phone is not used for a long time, it should be kept at full power as much as possible, and it will be charged for a while.

2. Do not continue charging for a long time after the phone is fully charged. Many people like to charge while sleeping, and then unplug the charger the next day. In this way, the phone will automatically stop charging after the battery is fully charged. However, during the charging process, the battery is overheated, and even the burning takes place during charging. We should try to avoid charging the phone for a long time without being guarded.

3. Don't play the phone while charging. Nowadays, the computing power of smart phones is very powerful. Nowadays, the power to play games with mobile phones is even greater. However, due to the limitation of the internal space of mobile phones, it is impossible to install cooling devices such as fans. Even if the copper pipes are cooled, they may not be as thorough as PCs. Therefore, we should try to avoid overheating in the process of using the smartphone. If you play mobile games at this time, the heat generated by the battery and the processor will be superimposed. In the long run, irreversible damage is caused to the components inside the battery and even the mobile phone. Therefore, it is not necessary to use the mobile phone as much as possible while charging.

4. Do not charge your phone on the sofa/bed. As mentioned before, fever is the culprit that shortens the battery life of mobile phones, and the mobile phone can only self-heat. If you charge on the sofa or bed, it will cause the heat of the fuselage to accumulate, causing local overheating. In addition, the sofa, bed sheets and cotton wadding are all flammable. At this time, if an accident occurs, the possibility of fire will be great.

5. Do not use the computer USB interface to charge the phone. Many people, including myself, use the USB interface of the computer to charge the phone for convenience. However, the USB interface current of many computers is less than 500mA, and the process of charging the mobile phone will be very long. What's more, the power supply mechanism of some computer motherboards is not perfect. If a variety of USB devices are connected or plugged in at the same time, the output current of the USB interface will be unstable, which is not conducive to the long-term use of the smart phone battery.

6. Do not use the charging treasure to charge the phone for a long time. Although many charging treasures can provide high current charging of more than 1A or even 2.1A, charging treasure is not a power supply after all, and cannot guarantee continuous output of voltage/current. In addition, the charging treasure itself will generate a certain amount of heat when charging the mobile phone, so it is not recommended to use the charging treasure for charging the mobile phone for a long time, and it can only be used as an emergency.

7. Do not use the phone for a long time in the case of too cold. Lithium batteries are not only afraid of heat, but also cold. In a cold environment, the activity of lithium battery and the lithium intercalation activity of the negative active material will be affected, and the battery capacity will decrease and the rate performance will decrease. When used at lower temperature conditions, lithium dendrites are formed on the surface of the negative electrode in severe cases, piercing the diaphragm and causing a safety accident. Android phones will also have a significantly shorter battery life at lower temperatures.

Here, we provide other products for your reference:

HBC BA225030 2100MAH 6V battery

HBC BA225030 1500mah 6V battery

HBC QD109300 24V ac adapter

HP PCG007 310W power supply 

Microsoft G3HTA001H 8030mAh/60.8Wh battery

Lenovo 45N1110 battery 24Wh 11.1V/11.4V

Huawei HB512627ECW battery 410MAH 3.82V

Lenovo L15D1P31 battery 4000mAh 3.8V

Huawei HB442528EBC battery 300MAH 3.8V

CRAFTSMAN CMCB6050 500mah/60V battery

Acer AS16B5J 5600mAh battery

Toshiba PA5173U-1BRS 5200mAh battery

Fujitsu FMVNBP212 2200mAh battery

11:20 15.8.2019 - 0 Kommentare

Shop special offers Lenovo BL229 batteries 2300mah 3.8v, compatible with Lenovo Gold Gladiator A8 A806 A808T. Best service, comfortable shopping! 1-year warranty, 30-days money back!

ECN10622_Te

  • Brand : Lenovo Battery

  • Type : Li-ion

  • Capacity : 2500mAh

  • Volatge : 4.35V

BL229 Replaceable universal battery model:

BL229

Perfectly compatible with Lenovo Gold Gladiator A8 A806 A808T:

For Lenovo Smartphone A8 A806 A808T

Lenovo BL229 Mobile phone battery repair tips

1. Refrigerator freezing method. Wrap the battery in paper, then wrap it in plastic wrap and put it into the frozen layer for about 3 days. After taking it out, place it in a cool place and let it dry for two days. Try charging again.

Explanation: The process of using the mobile phone is a process of charging and discharging the battery, and the negative and positive charges in the battery collide with each other. The reason why it is more and more unreliable and troublesome is that at normal temperature, the kinetic energy of the electron is relatively large, the battery is in an active state, and the leakage is relatively frequent. When the battery is in a low temperature environment, the structure of the lithium film and the electrolyte on the surface does not change much, and the interface thereof changes significantly. The leakage current and the like are reduced, and the standby time is increased.

2. Rubber wipe method. Using a clean eraser to wipe the metal surface of the phone's battery and the phone can also improve the use.

Explanation: For a long time, the metal surface of the battery has a certain degree of oxidation, resulting in poor contact and short use time, while the rubber enamel can erase the oxide layer on the surface to make the contact better. This method is more suitable for situations where the problem is not very serious.

3. Recharge the activation method. Discharge the battery completely and recharge it again.

Detailed steps: Find two wires and connect a small 1.5-volt bulb. Connect the two ends of the wire to the positive and negative terminals of the battery. After connecting, the light bulb will emit some shimmer. Wait until the light bulb is completely extinguished and recharge. This can also be changed. Battery performance. But this method is not very effective, but it is still somewhat useful.

How to use the BL229 battery correctly

1. Do not run out of battery power and then recharge. Nowadays, smart phones use lithium-ion polymer batteries, which have no so-called "memory effect" in nickel-cadmium batteries, so there is no need to run out of batteries and recharge them. In fact, if the lithium battery is in a low voltage state for a long time, it will cause the phenomenon that charging cannot occur. So when the phone's power drops to less than 20%, it should be charged. Therefore, if the mobile phone is not used for a long time, it should be kept at full power as much as possible, and it will be charged for a while.

2. Do not continue charging for a long time after the phone is fully charged. Many people like to charge while sleeping, and then unplug the charger the next day. In this way, the phone will automatically stop charging after the battery is fully charged. However, during the charging process, the battery is overheated, and even the burning takes place during charging. We should try to avoid charging the phone for a long time without being guarded.

3. Don't play the phone while charging. Nowadays, the computing power of smart phones is very powerful. Nowadays, the power to play games with mobile phones is even greater. However, due to the limitation of the internal space of mobile phones, it is impossible to install cooling devices such as fans. Even if the copper pipes are cooled, they may not be as thorough as PCs. Therefore, we should try to avoid overheating in the process of using the smartphone. If you play mobile games at this time, the heat generated by the battery and the processor will be superimposed. In the long run, irreversible damage is caused to the components inside the battery and even the mobile phone. Therefore, it is not necessary to use the mobile phone as much as possible while charging.

4. Do not charge your phone on the sofa/bed. As mentioned before, fever is the culprit that shortens the battery life of mobile phones, and the mobile phone can only self-heat. If you charge on the sofa or bed, it will cause the heat of the fuselage to accumulate, causing local overheating. In addition, the sofa, bed sheets and cotton wadding are all flammable. At this time, if an accident occurs, the possibility of fire will be great.

5. Do not use the computer USB interface to charge the phone. Many people, including myself, use the USB interface of the computer to charge the phone for convenience. However, the USB interface current of many computers is less than 500mA, and the process of charging the mobile phone will be very long. What's more, the power supply mechanism of some computer motherboards is not perfect. If a variety of USB devices are connected or plugged in at the same time, the output current of the USB interface will be unstable, which is not conducive to the long-term use of the smart phone battery.

6. Do not use the charging treasure to charge the phone for a long time. Although many charging treasures can provide high current charging of more than 1A or even 2.1A, charging treasure is not a power supply after all, and cannot guarantee continuous output of voltage/current. In addition, the charging treasure itself will generate a certain amount of heat when charging the mobile phone, so it is not recommended to use the charging treasure for charging the mobile phone for a long time, and it can only be used as an emergency.

7. Do not use the phone for a long time in the case of too cold. Lithium batteries are not only afraid of heat, but also cold. In a cold environment, the activity of lithium battery and the lithium intercalation activity of the negative active material will be affected, and the battery capacity will decrease and the rate performance will decrease. When used at lower temperature conditions, lithium dendrites are formed on the surface of the negative electrode in severe cases, piercing the diaphragm and causing a safety accident. Android phones will also have a significantly shorter battery life at lower temperatures.

Here, we provide other products for your reference:

HBC BA225030 2100MAH 6V battery

HBC BA225030 1500mah 6V battery

HBC QD109300 24V ac adapter

HP PCG007 310W power supply 

Microsoft G3HTA001H 8030mAh/60.8Wh battery

Lenovo 45N1110 battery 24Wh 11.1V/11.4V

Huawei HB512627ECW battery 410MAH 3.82V

Lenovo L15D1P31 battery 4000mAh 3.8V

Huawei HB442528EBC battery 300MAH 3.8V

CRAFTSMAN CMCB6050 500mah/60V battery

Acer AS16B5J 5600mAh battery

Toshiba PA5173U-1BRS 5200mAh battery

Fujitsu FMVNBP212 2200mAh battery

11:38 9.8.2019 - 0 Kommentare

New listing specials Lenovo L14M4P71 laptop battery , 4680mAh 7.6V, is suitable for battery Lenovo Yoga 3 11 80J8 11-5Y10 11-5Y71. Superior quality and cheap price! 1 year warranty, 30 days money-back guarantee!

LEN19I212

  • Brand : Lenovo Battery

  • Type : Li-ion

  • Capacity : 4680mAh

  • Volatge : 7.6V

L14M4P71 Replaceable universal battery model:

L14M4P71 L14L4P71 2ICP/49/100-2

Perfectly compatible with Lenovo Yoga 3 11 80J8 11-5Y10 11-5Y71:

Lenovo Yoga 3 11 80J8 11-5Y10 11-5Y71

Why the laptop can't be charged

1. The laptop battery management software disables the charging function.

2. Laptop battery aging or daily careless maintenance, often use the battery power to exhaust until the computer automatically shuts down. In fact, this is very easy to damage the battery.

3. Some users will take out the laptop battery for a long time, put it away, this kind of battery will be taken down and stored, it will also lose the battery, which will make the battery life of the laptop worse and worse.

L14M4P71 Notebook battery charging shows 0% available power is turned on and can not be charged solution

1. Check if the battery charging is disabled. If the user sets the laptop battery, the laptop battery management software disables the charging function

2. If there is no problem with the check settings, if the laptop battery is used for a long time, the over-discharge will cause 0% of the available power is turned on and not charged. If it is taken for repair, even if it is repaired, there will be problems such as battery life and long life. It is best to buy. Replace with a new laptop battery.

3. The battery has been used for too long, it is useless, resulting in poor contact, it is recommended to open the notebook clear gray, plug the power cord battery to try.

4. notebook win7 system battery internal control circuit or battery core problems, need to take over.

HOT SALES

HBC BA225030 2100MAH 6V battery

HBC BA225030 1500mah 6V battery

HBC QD109300 24V ac adapter

HP PCG007 310W power supply 

Microsoft G3HTA001H 8030mAh/60.8Wh battery

Lenovo 45N1110 battery 24Wh 11.1V/11.4V

Huawei HB512627ECW battery 410MAH 3.82V

Lenovo L15D1P31 battery 4000mAh 3.8V

Huawei HB442528EBC battery 300MAH 3.8V

CRAFTSMAN CMCB6050 500mah/60V battery

Acer AS16B5J 5600mAh battery

Toshiba PA5173U-1BRS 5200mAh battery

Fujitsu FMVNBP212 2200mAh battery

11:38 9.8.2019 - 0 Kommentare

New listing specials Samsung AA-PBTN8GB laptop battery , 6180mAh 15.2V, is suitable for battery Samsung 1588-3366. Superior quality and cheap price! 1 year warranty, 30 days money-back guarantee!

SAM19J208

  • Brand : Samsung Battery

  • Type : Li-ion

  • Capacity : 6180mAh

  • Volatge : 15.2V

AA-PBTN8GB Replaceable universal battery model:

AA-PBTN8GB 1588-3366

Perfectly compatible with Samsung 1588-3366:

Samsung AA-PBTN8GB 1588-3366

Why the laptop can't be charged

1. The laptop battery management software disables the charging function.

2. Laptop battery aging or daily careless maintenance, often use the battery power to exhaust until the computer automatically shuts down. In fact, this is very easy to damage the battery.

3. Some users will take out the laptop battery for a long time, put it away, this kind of battery will be taken down and stored, it will also lose the battery, which will make the battery life of the laptop worse and worse.

AA-PBTN8GB Notebook battery charging shows 0% available power is turned on and can not be charged solution

1. Check if the battery charging is disabled. If the user sets the laptop battery, the laptop battery management software disables the charging function

2. If there is no problem with the check settings, if the laptop battery is used for a long time, the over-discharge will cause 0% of the available power is turned on and not charged. If it is taken for repair, even if it is repaired, there will be problems such as battery life and long life. It is best to buy. Replace with a new laptop battery.

3. The battery has been used for too long, it is useless, resulting in poor contact, it is recommended to open the notebook clear gray, plug the power cord battery to try.

4. notebook win7 system battery internal control circuit or battery core problems, need to take over.

HOT SALES

HBC BA225030 2100MAH 6V battery

HBC BA225030 1500mah 6V battery

HBC QD109300 24V ac adapter

HP PCG007 310W power supply 

Microsoft G3HTA001H 8030mAh/60.8Wh battery

Lenovo 45N1110 battery 24Wh 11.1V/11.4V

Huawei HB512627ECW battery 410MAH 3.82V

Lenovo L15D1P31 battery 4000mAh 3.8V

Huawei HB442528EBC battery 300MAH 3.8V

CRAFTSMAN CMCB6050 500mah/60V battery

Acer AS16B5J 5600mAh battery

Toshiba PA5173U-1BRS 5200mAh battery

Fujitsu FMVNBP212 2200mAh battery

11:38 9.8.2019 - 0 Kommentare

New listing specials Dell XCNR3 laptop battery , 34Wh 7.6V, is suitable for battery DELL Latitude 13 7370 Ultrabook Series 0WV7CG. Superior quality and cheap price! 1 year warranty, 30 days money-back guarantee!

DEL19I213

  • Brand : Dell Battery

  • Type : Li-ion

  • Capacity : 34Wh

  • Volatge : 7.6V

XCNR3 Replaceable universal battery model:

XCNR3 WY7CG

Perfectly compatible with DELL Latitude 13 7370 Ultrabook Series 0WV7CG:

For DELL Latitude 13 7370 Ultrabook Series

Why the laptop can't be charged

1. The laptop battery management software disables the charging function.

2. Laptop battery aging or daily careless maintenance, often use the battery power to exhaust until the computer automatically shuts down. In fact, this is very easy to damage the battery.

3. Some users will take out the laptop battery for a long time, put it away, this kind of battery will be taken down and stored, it will also lose the battery, which will make the battery life of the laptop worse and worse.

XCNR3 Notebook battery charging shows 0% available power is turned on and can not be charged solution

1. Check if the battery charging is disabled. If the user sets the laptop battery, the laptop battery management software disables the charging function

2. If there is no problem with the check settings, if the laptop battery is used for a long time, the over-discharge will cause 0% of the available power is turned on and not charged. If it is taken for repair, even if it is repaired, there will be problems such as battery life and long life. It is best to buy. Replace with a new laptop battery.

3. The battery has been used for too long, it is useless, resulting in poor contact, it is recommended to open the notebook clear gray, plug the power cord battery to try.

4. notebook win7 system battery internal control circuit or battery core problems, need to take over.

HOT SALES

HBC BA225030 2100MAH 6V battery

HBC BA225030 1500mah 6V battery

HBC QD109300 24V ac adapter

HP PCG007 310W power supply 

Microsoft G3HTA001H 8030mAh/60.8Wh battery

Lenovo 45N1110 battery 24Wh 11.1V/11.4V

Huawei HB512627ECW battery 410MAH 3.82V

Lenovo L15D1P31 battery 4000mAh 3.8V

Huawei HB442528EBC battery 300MAH 3.8V

CRAFTSMAN CMCB6050 500mah/60V battery

Acer AS16B5J 5600mAh battery

Toshiba PA5173U-1BRS 5200mAh battery

Fujitsu FMVNBP212 2200mAh battery

11:37 9.8.2019 - 0 Kommentare

New listing specials Dell Y9N00 laptop battery , 6000mAh 7.4V, is suitable for battery Dell XPS 13 13-L321X 13-L322X. Superior quality and cheap price! 1 year warranty, 30 days money-back guarantee!

DEL19I215

  • Brand : Dell Battery

  • Type : Li-ion

  • Capacity : 6000mAh

  • Volatge : 7.4V

Y9N00 Replaceable universal battery model:

0489XN 489XN Y9N00 PKH18 0PKH18

Perfectly compatible with Dell XPS 13 13-L321X 13-L322X:

DELL XPS 13 SeriesDELL XPS 13-L321X SeriesDELL XPS 13-L322X SeriesDELL XPS L321X SeriesDELL XPS L322X Seriesnot Compatible C4K9V 55wh

Why the laptop can't be charged

1. The laptop battery management software disables the charging function.

2. Laptop battery aging or daily careless maintenance, often use the battery power to exhaust until the computer automatically shuts down. In fact, this is very easy to damage the battery.

3. Some users will take out the laptop battery for a long time, put it away, this kind of battery will be taken down and stored, it will also lose the battery, which will make the battery life of the laptop worse and worse.

Y9N00 Notebook battery charging shows 0% available power is turned on and can not be charged solution

1. Check if the battery charging is disabled. If the user sets the laptop battery, the laptop battery management software disables the charging function

2. If there is no problem with the check settings, if the laptop battery is used for a long time, the over-discharge will cause 0% of the available power is turned on and not charged. If it is taken for repair, even if it is repaired, there will be problems such as battery life and long life. It is best to buy. Replace with a new laptop battery.

3. The battery has been used for too long, it is useless, resulting in poor contact, it is recommended to open the notebook clear gray, plug the power cord battery to try.

4. notebook win7 system battery internal control circuit or battery core problems, need to take over.

HOT SALES

HBC BA225030 2100MAH 6V battery

HBC BA225030 1500mah 6V battery

HBC QD109300 24V ac adapter

HP PCG007 310W power supply 

Microsoft G3HTA001H 8030mAh/60.8Wh battery

Lenovo 45N1110 battery 24Wh 11.1V/11.4V

Huawei HB512627ECW battery 410MAH 3.82V

Lenovo L15D1P31 battery 4000mAh 3.8V

Huawei HB442528EBC battery 300MAH 3.8V

CRAFTSMAN CMCB6050 500mah/60V battery

Acer AS16B5J 5600mAh battery

Toshiba PA5173U-1BRS 5200mAh battery

Fujitsu FMVNBP212 2200mAh battery

11:37 9.8.2019 - 0 Kommentare

New listing specials Dell NGGX5 laptop battery , 4130mAh 11.4V, is suitable for battery DELL Latitude E5570 E5250 E5270 E5470 JY8D6. Superior quality and cheap price! 1 year warranty, 30 days money-back guarantee!

DEL19I214

  • Brand : Dell Battery

  • Type : Li-ion

  • Capacity : 4130mAh

  • Volatge : 11.4V

NGGX5 Replaceable universal battery model:

NGGX5

Perfectly compatible with DELL Latitude E5570 E5250 E5270 E5470 JY8D6:

For DELL Latitude E5570 E5250 E5270 E5470 JY8D6 SeriesCharge limit voltage:13.35V

Why the laptop can't be charged

1. The laptop battery management software disables the charging function.

2. Laptop battery aging or daily careless maintenance, often use the battery power to exhaust until the computer automatically shuts down. In fact, this is very easy to damage the battery.

3. Some users will take out the laptop battery for a long time, put it away, this kind of battery will be taken down and stored, it will also lose the battery, which will make the battery life of the laptop worse and worse.

NGGX5 Notebook battery charging shows 0% available power is turned on and can not be charged solution

1. Check if the battery charging is disabled. If the user sets the laptop battery, the laptop battery management software disables the charging function

2. If there is no problem with the check settings, if the laptop battery is used for a long time, the over-discharge will cause 0% of the available power is turned on and not charged. If it is taken for repair, even if it is repaired, there will be problems such as battery life and long life. It is best to buy. Replace with a new laptop battery.

3. The battery has been used for too long, it is useless, resulting in poor contact, it is recommended to open the notebook clear gray, plug the power cord battery to try.

4. notebook win7 system battery internal control circuit or battery core problems, need to take over.

HOT SALES

HBC BA225030 2100MAH 6V battery

HBC BA225030 1500mah 6V battery

HBC QD109300 24V ac adapter

HP PCG007 310W power supply 

Microsoft G3HTA001H 8030mAh/60.8Wh battery

Lenovo 45N1110 battery 24Wh 11.1V/11.4V

Huawei HB512627ECW battery 410MAH 3.82V

Lenovo L15D1P31 battery 4000mAh 3.8V

Huawei HB442528EBC battery 300MAH 3.8V

CRAFTSMAN CMCB6050 500mah/60V battery

Acer AS16B5J 5600mAh battery

Toshiba PA5173U-1BRS 5200mAh battery

Fujitsu FMVNBP212 2200mAh battery

07:37 6.8.2019 - 0 Kommentare

Shop special offers LEAGOO BT-5705 batteries 2300mah 3.8v, compatible with LEAGOO M9 Pro. Best service, comfortable shopping! 1-year warranty, 30-days money back!

ECN11087_Te

  • Brand : LEAGOO Battery

  • Type : Li-ion

  • Capacity : 3000mAh/11.4wh

  • Volatge : 3.8V

BT-5705 Replaceable universal battery model:

BT-5705

Perfectly compatible with LEAGOO M9 Pro:

LEAGOO M9 ProCharge Limited voltage: 4.35V

LEAGOO BT-5705 Mobile phone battery repair tips

1. Refrigerator freezing method. Wrap the battery in paper, then wrap it in plastic wrap and put it into the frozen layer for about 3 days. After taking it out, place it in a cool place and let it dry for two days. Try charging again.

Explanation: The process of using the mobile phone is a process of charging and discharging the battery, and the negative and positive charges in the battery collide with each other. The reason why it is more and more unreliable and troublesome is that at normal temperature, the kinetic energy of the electron is relatively large, the battery is in an active state, and the leakage is relatively frequent. When the battery is in a low temperature environment, the structure of the lithium film and the electrolyte on the surface does not change much, and the interface thereof changes significantly. The leakage current and the like are reduced, and the standby time is increased.

2. Rubber wipe method. Using a clean eraser to wipe the metal surface of the phone's battery and the phone can also improve the use.

Explanation: For a long time, the metal surface of the battery has a certain degree of oxidation, resulting in poor contact and short use time, while the rubber enamel can erase the oxide layer on the surface to make the contact better. This method is more suitable for situations where the problem is not very serious.

3. Recharge the activation method. Discharge the battery completely and recharge it again.

Detailed steps: Find two wires and connect a small 1.5-volt bulb. Connect the two ends of the wire to the positive and negative terminals of the battery. After connecting, the light bulb will emit some shimmer. Wait until the light bulb is completely extinguished and recharge. This can also be changed. Battery performance. But this method is not very effective, but it is still somewhat useful.

How to use the BT-5705 battery correctly

1. Do not run out of battery power and then recharge. Nowadays, smart phones use lithium-ion polymer batteries, which have no so-called "memory effect" in nickel-cadmium batteries, so there is no need to run out of batteries and recharge them. In fact, if the lithium battery is in a low voltage state for a long time, it will cause the phenomenon that charging cannot occur. So when the phone's power drops to less than 20%, it should be charged. Therefore, if the mobile phone is not used for a long time, it should be kept at full power as much as possible, and it will be charged for a while.

2. Do not continue charging for a long time after the phone is fully charged. Many people like to charge while sleeping, and then unplug the charger the next day. In this way, the phone will automatically stop charging after the battery is fully charged. However, during the charging process, the battery is overheated, and even the burning takes place during charging. We should try to avoid charging the phone for a long time without being guarded.

3. Don't play the phone while charging. Nowadays, the computing power of smart phones is very powerful. Nowadays, the power to play games with mobile phones is even greater. However, due to the limitation of the internal space of mobile phones, it is impossible to install cooling devices such as fans. Even if the copper pipes are cooled, they may not be as thorough as PCs. Therefore, we should try to avoid overheating in the process of using the smartphone. If you play mobile games at this time, the heat generated by the battery and the processor will be superimposed. In the long run, irreversible damage is caused to the components inside the battery and even the mobile phone. Therefore, it is not necessary to use the mobile phone as much as possible while charging.

4. Do not charge your phone on the sofa/bed. As mentioned before, fever is the culprit that shortens the battery life of mobile phones, and the mobile phone can only self-heat. If you charge on the sofa or bed, it will cause the heat of the fuselage to accumulate, causing local overheating. In addition, the sofa, bed sheets and cotton wadding are all flammable. At this time, if an accident occurs, the possibility of fire will be great.

5. Do not use the computer USB interface to charge the phone. Many people, including myself, use the USB interface of the computer to charge the phone for convenience. However, the USB interface current of many computers is less than 500mA, and the process of charging the mobile phone will be very long. What's more, the power supply mechanism of some computer motherboards is not perfect. If a variety of USB devices are connected or plugged in at the same time, the output current of the USB interface will be unstable, which is not conducive to the long-term use of the smart phone battery.

6. Do not use the charging treasure to charge the phone for a long time. Although many charging treasures can provide high current charging of more than 1A or even 2.1A, charging treasure is not a power supply after all, and cannot guarantee continuous output of voltage/current. In addition, the charging treasure itself will generate a certain amount of heat when charging the mobile phone, so it is not recommended to use the charging treasure for charging the mobile phone for a long time, and it can only be used as an emergency.

6. Do not use the phone for a long time in the case of too cold. Lithium batteries are not only afraid of heat, but also cold. In a cold environment, the activity of lithium battery and the lithium intercalation activity of the negative active material will be affected, and the battery capacity will decrease and the rate performance will decrease. When used at lower temperature conditions, lithium dendrites are formed on the surface of the negative electrode in severe cases, piercing the diaphragm and causing a safety accident. Android phones will also have a significantly shorter battery life at lower temperatures.

Other batteries you might find

LEAGOO JY-G5 2000mAh 3.8V

LEAGOO BL-48TH 3140MAH 3.8V

LEAGOO BL270 4000mAh/15.4WH 3.85V

LEAGOO X18 3200mAh/12.16WH 3.8V

LEAGOO LI3823T43P3H715345 2300mAh 3.8V

07:36 6.8.2019 - 0 Kommentare

Shop special offers Ulefone GEMINI_PRO_T1 batteries 2300mah 3.8v, compatible with Ulefone Gemini pro T1. Best service, comfortable shopping! 1-year warranty, 30-days money back!

ECN11086_Te

GEMINI_PRO_T1 Replaceable universal battery model:

Gemini_Pro_T1

Perfectly compatible with Ulefone Gemini pro T1:

Ulefone Gemini Pro T1

Ulefone GEMINI_PRO_T1 Mobile phone battery repair tips

1. Refrigerator freezing method. Wrap the battery in paper, then wrap it in plastic wrap and put it into the frozen layer for about 3 days. After taking it out, place it in a cool place and let it dry for two days. Try charging again.

Explanation: The process of using the mobile phone is a process of charging and discharging the battery, and the negative and positive charges in the battery collide with each other. The reason why it is more and more unreliable and troublesome is that at normal temperature, the kinetic energy of the electron is relatively large, the battery is in an active state, and the leakage is relatively frequent. When the battery is in a low temperature environment, the structure of the lithium film and the electrolyte on the surface does not change much, and the interface thereof changes significantly. The leakage current and the like are reduced, and the standby time is increased.

2. Rubber wipe method. Using a clean eraser to wipe the metal surface of the phone's battery and the phone can also improve the use.

Explanation: For a long time, the metal surface of the battery has a certain degree of oxidation, resulting in poor contact and short use time, while the rubber enamel can erase the oxide layer on the surface to make the contact better. This method is more suitable for situations where the problem is not very serious.

3. Recharge the activation method. Discharge the battery completely and recharge it again.

Detailed steps: Find two wires and connect a small 1.5-volt bulb. Connect the two ends of the wire to the positive and negative terminals of the battery. After connecting, the light bulb will emit some shimmer. Wait until the light bulb is completely extinguished and recharge. This can also be changed. Battery performance. But this method is not very effective, but it is still somewhat useful.

How to use the GEMINI_PRO_T1 battery correctly

1. Do not run out of battery power and then recharge. Nowadays, smart phones use lithium-ion polymer batteries, which have no so-called "memory effect" in nickel-cadmium batteries, so there is no need to run out of batteries and recharge them. In fact, if the lithium battery is in a low voltage state for a long time, it will cause the phenomenon that charging cannot occur. So when the phone's power drops to less than 20%, it should be charged. Therefore, if the mobile phone is not used for a long time, it should be kept at full power as much as possible, and it will be charged for a while.

2. Do not continue charging for a long time after the phone is fully charged. Many people like to charge while sleeping, and then unplug the charger the next day. In this way, the phone will automatically stop charging after the battery is fully charged. However, during the charging process, the battery is overheated, and even the burning takes place during charging. We should try to avoid charging the phone for a long time without being guarded.

3. Don't play the phone while charging. Nowadays, the computing power of smart phones is very powerful. Nowadays, the power to play games with mobile phones is even greater. However, due to the limitation of the internal space of mobile phones, it is impossible to install cooling devices such as fans. Even if the copper pipes are cooled, they may not be as thorough as PCs. Therefore, we should try to avoid overheating in the process of using the smartphone. If you play mobile games at this time, the heat generated by the battery and the processor will be superimposed. In the long run, irreversible damage is caused to the components inside the battery and even the mobile phone. Therefore, it is not necessary to use the mobile phone as much as possible while charging.

4. Do not charge your phone on the sofa/bed. As mentioned before, fever is the culprit that shortens the battery life of mobile phones, and the mobile phone can only self-heat. If you charge on the sofa or bed, it will cause the heat of the fuselage to accumulate, causing local overheating. In addition, the sofa, bed sheets and cotton wadding are all flammable. At this time, if an accident occurs, the possibility of fire will be great.

5. Do not use the computer USB interface to charge the phone. Many people, including myself, use the USB interface of the computer to charge the phone for convenience. However, the USB interface current of many computers is less than 500mA, and the process of charging the mobile phone will be very long. What's more, the power supply mechanism of some computer motherboards is not perfect. If a variety of USB devices are connected or plugged in at the same time, the output current of the USB interface will be unstable, which is not conducive to the long-term use of the smart phone battery.

6. Do not use the charging treasure to charge the phone for a long time. Although many charging treasures can provide high current charging of more than 1A or even 2.1A, charging treasure is not a power supply after all, and cannot guarantee continuous output of voltage/current. In addition, the charging treasure itself will generate a certain amount of heat when charging the mobile phone, so it is not recommended to use the charging treasure for charging the mobile phone for a long time, and it can only be used as an emergency.

6. Do not use the phone for a long time in the case of too cold. Lithium batteries are not only afraid of heat, but also cold. In a cold environment, the activity of lithium battery and the lithium intercalation activity of the negative active material will be affected, and the battery capacity will decrease and the rate performance will decrease. When used at lower temperature conditions, lithium dendrites are formed on the surface of the negative electrode in severe cases, piercing the diaphragm and causing a safety accident. Android phones will also have a significantly shorter battery life at lower temperatures.

Other batteries you might find

Ulefone BL262 5100MAH 3.82V

Ulefone BL267 3000MAH 3.85V

Ulefone LI3934T44P8H876744 3400mAh/13.1WH 3.85V

Ulefone C11P1605 3000MAH/11.5Wh 3.85V

Ulefone BL265 3000mAh 3.8V

07:36 6.8.2019 - 0 Kommentare

Shop special offers Doogee X60L batteries 2300mah 3.8v, compatible with Doogee X60L. Best service, comfortable shopping! 1-year warranty, 30-days money back!

ECN11085_Te

  • Brand : Doogee Battery

  • Type : Li-ion

  • Capacity : 3300mAh

  • Volatge : 3.8V

X60L Replaceable universal battery model:

X60L

Perfectly compatible with Doogee X60L:

Doogee X60LCharge Limited voltage:4.35V

Doogee X60L Mobile phone battery repair tips

1. Refrigerator freezing method. Wrap the battery in paper, then wrap it in plastic wrap and put it into the frozen layer for about 3 days. After taking it out, place it in a cool place and let it dry for two days. Try charging again.

Explanation: The process of using the mobile phone is a process of charging and discharging the battery, and the negative and positive charges in the battery collide with each other. The reason why it is more and more unreliable and troublesome is that at normal temperature, the kinetic energy of the electron is relatively large, the battery is in an active state, and the leakage is relatively frequent. When the battery is in a low temperature environment, the structure of the lithium film and the electrolyte on the surface does not change much, and the interface thereof changes significantly. The leakage current and the like are reduced, and the standby time is increased.

2. Rubber wipe method. Using a clean eraser to wipe the metal surface of the phone's battery and the phone can also improve the use.

Explanation: For a long time, the metal surface of the battery has a certain degree of oxidation, resulting in poor contact and short use time, while the rubber enamel can erase the oxide layer on the surface to make the contact better. This method is more suitable for situations where the problem is not very serious.

3. Recharge the activation method. Discharge the battery completely and recharge it again.

Detailed steps: Find two wires and connect a small 1.5-volt bulb. Connect the two ends of the wire to the positive and negative terminals of the battery. After connecting, the light bulb will emit some shimmer. Wait until the light bulb is completely extinguished and recharge. This can also be changed. Battery performance. But this method is not very effective, but it is still somewhat useful.

How to use the X60L battery correctly

1. Do not run out of battery power and then recharge. Nowadays, smart phones use lithium-ion polymer batteries, which have no so-called "memory effect" in nickel-cadmium batteries, so there is no need to run out of batteries and recharge them. In fact, if the lithium battery is in a low voltage state for a long time, it will cause the phenomenon that charging cannot occur. So when the phone's power drops to less than 20%, it should be charged. Therefore, if the mobile phone is not used for a long time, it should be kept at full power as much as possible, and it will be charged for a while.

2. Do not continue charging for a long time after the phone is fully charged. Many people like to charge while sleeping, and then unplug the charger the next day. In this way, the phone will automatically stop charging after the battery is fully charged. However, during the charging process, the battery is overheated, and even the burning takes place during charging. We should try to avoid charging the phone for a long time without being guarded.

3. Don't play the phone while charging. Nowadays, the computing power of smart phones is very powerful. Nowadays, the power to play games with mobile phones is even greater. However, due to the limitation of the internal space of mobile phones, it is impossible to install cooling devices such as fans. Even if the copper pipes are cooled, they may not be as thorough as PCs. Therefore, we should try to avoid overheating in the process of using the smartphone. If you play mobile games at this time, the heat generated by the battery and the processor will be superimposed. In the long run, irreversible damage is caused to the components inside the battery and even the mobile phone. Therefore, it is not necessary to use the mobile phone as much as possible while charging.

4. Do not charge your phone on the sofa/bed. As mentioned before, fever is the culprit that shortens the battery life of mobile phones, and the mobile phone can only self-heat. If you charge on the sofa or bed, it will cause the heat of the fuselage to accumulate, causing local overheating. In addition, the sofa, bed sheets and cotton wadding are all flammable. At this time, if an accident occurs, the possibility of fire will be great.

5. Do not use the computer USB interface to charge the phone. Many people, including myself, use the USB interface of the computer to charge the phone for convenience. However, the USB interface current of many computers is less than 500mA, and the process of charging the mobile phone will be very long. What's more, the power supply mechanism of some computer motherboards is not perfect. If a variety of USB devices are connected or plugged in at the same time, the output current of the USB interface will be unstable, which is not conducive to the long-term use of the smart phone battery.

6. Do not use the charging treasure to charge the phone for a long time. Although many charging treasures can provide high current charging of more than 1A or even 2.1A, charging treasure is not a power supply after all, and cannot guarantee continuous output of voltage/current. In addition, the charging treasure itself will generate a certain amount of heat when charging the mobile phone, so it is not recommended to use the charging treasure for charging the mobile phone for a long time, and it can only be used as an emergency.

6. Do not use the phone for a long time in the case of too cold. Lithium batteries are not only afraid of heat, but also cold. In a cold environment, the activity of lithium battery and the lithium intercalation activity of the negative active material will be affected, and the battery capacity will decrease and the rate performance will decrease. When used at lower temperature conditions, lithium dendrites are formed on the surface of the negative electrode in severe cases, piercing the diaphragm and causing a safety accident. Android phones will also have a significantly shorter battery life at lower temperatures.

Other batteries you might find

Doogee IFLD-401 4000mAh/15.4Wh 3.85V

Doogee BL-T19 3.8V

Doogee V636468P 4180mAh 3.8V

Doogee 4050 1300mAh/4.81WH 3.7V

Doogee TLP032B2 3240MAH 3.7V

07:36 6.8.2019 - 0 Kommentare

Shop special offers HOMTOM ZOJI batteries 2300mah 3.8v, compatible with Homtom ZOJI Z6 Z7. Best service, comfortable shopping! 1-year warranty, 30-days money back!

ECN11084_Te

  • Brand : HOMTOM Battery

  • Type : Li-ion

  • Capacity : 3000mAh /11.4Wh

  • Volatge : 3.8V

ZOJI Replaceable universal battery model:

ZOJI

Perfectly compatible with Homtom ZOJI Z6 Z7:

Homtom ZOJI Z6 Z7Charge Limited voltage: 4.35V

HOMTOM ZOJI Mobile phone battery repair tips

1. Refrigerator freezing method. Wrap the battery in paper, then wrap it in plastic wrap and put it into the frozen layer for about 3 days. After taking it out, place it in a cool place and let it dry for two days. Try charging again.

Explanation: The process of using the mobile phone is a process of charging and discharging the battery, and the negative and positive charges in the battery collide with each other. The reason why it is more and more unreliable and troublesome is that at normal temperature, the kinetic energy of the electron is relatively large, the battery is in an active state, and the leakage is relatively frequent. When the battery is in a low temperature environment, the structure of the lithium film and the electrolyte on the surface does not change much, and the interface thereof changes significantly. The leakage current and the like are reduced, and the standby time is increased.

2. Rubber wipe method. Using a clean eraser to wipe the metal surface of the phone's battery and the phone can also improve the use.

Explanation: For a long time, the metal surface of the battery has a certain degree of oxidation, resulting in poor contact and short use time, while the rubber enamel can erase the oxide layer on the surface to make the contact better. This method is more suitable for situations where the problem is not very serious.

3. Recharge the activation method. Discharge the battery completely and recharge it again.

Detailed steps: Find two wires and connect a small 1.5-volt bulb. Connect the two ends of the wire to the positive and negative terminals of the battery. After connecting, the light bulb will emit some shimmer. Wait until the light bulb is completely extinguished and recharge. This can also be changed. Battery performance. But this method is not very effective, but it is still somewhat useful.

How to use the ZOJI battery correctly

1. Do not run out of battery power and then recharge. Nowadays, smart phones use lithium-ion polymer batteries, which have no so-called "memory effect" in nickel-cadmium batteries, so there is no need to run out of batteries and recharge them. In fact, if the lithium battery is in a low voltage state for a long time, it will cause the phenomenon that charging cannot occur. So when the phone's power drops to less than 20%, it should be charged. Therefore, if the mobile phone is not used for a long time, it should be kept at full power as much as possible, and it will be charged for a while.

2. Do not continue charging for a long time after the phone is fully charged. Many people like to charge while sleeping, and then unplug the charger the next day. In this way, the phone will automatically stop charging after the battery is fully charged. However, during the charging process, the battery is overheated, and even the burning takes place during charging. We should try to avoid charging the phone for a long time without being guarded.

3. Don't play the phone while charging. Nowadays, the computing power of smart phones is very powerful. Nowadays, the power to play games with mobile phones is even greater. However, due to the limitation of the internal space of mobile phones, it is impossible to install cooling devices such as fans. Even if the copper pipes are cooled, they may not be as thorough as PCs. Therefore, we should try to avoid overheating in the process of using the smartphone. If you play mobile games at this time, the heat generated by the battery and the processor will be superimposed. In the long run, irreversible damage is caused to the components inside the battery and even the mobile phone. Therefore, it is not necessary to use the mobile phone as much as possible while charging.

4. Do not charge your phone on the sofa/bed. As mentioned before, fever is the culprit that shortens the battery life of mobile phones, and the mobile phone can only self-heat. If you charge on the sofa or bed, it will cause the heat of the fuselage to accumulate, causing local overheating. In addition, the sofa, bed sheets and cotton wadding are all flammable. At this time, if an accident occurs, the possibility of fire will be great.

5. Do not use the computer USB interface to charge the phone. Many people, including myself, use the USB interface of the computer to charge the phone for convenience. However, the USB interface current of many computers is less than 500mA, and the process of charging the mobile phone will be very long. What's more, the power supply mechanism of some computer motherboards is not perfect. If a variety of USB devices are connected or plugged in at the same time, the output current of the USB interface will be unstable, which is not conducive to the long-term use of the smart phone battery.

6. Do not use the charging treasure to charge the phone for a long time. Although many charging treasures can provide high current charging of more than 1A or even 2.1A, charging treasure is not a power supply after all, and cannot guarantee continuous output of voltage/current. In addition, the charging treasure itself will generate a certain amount of heat when charging the mobile phone, so it is not recommended to use the charging treasure for charging the mobile phone for a long time, and it can only be used as an emergency.

6. Do not use the phone for a long time in the case of too cold. Lithium batteries are not only afraid of heat, but also cold. In a cold environment, the activity of lithium battery and the lithium intercalation activity of the negative active material will be affected, and the battery capacity will decrease and the rate performance will decrease. When used at lower temperature conditions, lithium dendrites are formed on the surface of the negative electrode in severe cases, piercing the diaphragm and causing a safety accident. Android phones will also have a significantly shorter battery life at lower temperatures.

Other batteries you might find

HOMTOM BL263 3000MAH 3.85V

HOMTOM EB-BG920ABE 3.85V

HOMTOM BE_TOUCH_2 3050mAh 3.8V

HOMTOM BL-45A1H 2300MAH 3.8V

HOMTOM TLP024C1 3500MAH 3.8V

07:55 29.7.2019 - 0 Kommentare

Shop Toshiba F19 battery 2300mah 3.8v, compatible with Toshiba F-02C F-04C F-01e F-04D F-06B F-06D. Best service, comfortable shopping! 1-year warranty, 30-days money back!

ECN11040_Te

  • Brand : Toshiba Battery

  • Type : Li-ion

  • Capacity : 3020mAh/12WH

  • Volatge : 3.8V

F19 Replaceable universal battery model:

F19

Perfectly compatible with Toshiba F-02C F-04C F-01e F-04D F-06B F-06D:

Toshiba F-02C F-04C F-01e F-04D F-06B F-06D

Mobile phone battery repair tips

1. Refrigerator freezing method. Wrap the battery in paper, then wrap it in plastic wrap and put it into the frozen layer for about 3 days. After taking it out, place it in a cool place and let it dry for two days. Try charging again.

Explanation: The process of using the mobile phone is a process of charging and discharging the battery, and the negative and positive charges in the battery collide with each other. The reason why it is more and more unreliable and troublesome is that at normal temperature, the kinetic energy of the electron is relatively large, the battery is in an active state, and the leakage is relatively frequent. When the battery is in a low temperature environment, the structure of the lithium film and the electrolyte on the surface does not change much, and the interface thereof changes significantly. The leakage current and the like are reduced, and the standby time is increased.

2. Rubber wipe method. Using a clean eraser to wipe the metal surface of the phone's battery and the phone can also improve the use.

Explanation: For a long time, the metal surface of the battery has a certain degree of oxidation, resulting in poor contact and short use time, while the rubber enamel can erase the oxide layer on the surface to make the contact better. This method is more suitable for situations where the problem is not very serious.

3. Recharge the activation method. Discharge the battery completely and recharge it again.

Detailed steps: Find two wires and connect a small 1.5-volt bulb. Connect the two ends of the wire to the positive and negative terminals of the battery. After connecting, the light bulb will emit some shimmer. Wait until the light bulb is completely extinguished and recharge. This can also be changed. Battery performance. But this method is not very effective, but it is still somewhat useful.

How to use the F19 battery correctly

1. Do not run out of battery power and then recharge. Nowadays, smart phones use lithium-ion polymer batteries, which have no so-called "memory effect" in nickel-cadmium batteries, so there is no need to run out of batteries and recharge them. In fact, if the lithium battery is in a low voltage state for a long time, it will cause the phenomenon that charging cannot occur. So when the phone's power drops to less than 20%, it should be charged. Therefore, if the mobile phone is not used for a long time, it should be kept at full power as much as possible, and it will be charged for a while.

2. Do not continue charging for a long time after the phone is fully charged. Many people like to charge while sleeping, and then unplug the charger the next day. In this way, the phone will automatically stop charging after the battery is fully charged. However, during the charging process, the battery is overheated, and even the burning takes place during charging. We should try to avoid charging the phone for a long time without being guarded.

3. Don't play the phone while charging. Nowadays, the computing power of smart phones is very powerful. Nowadays, the power to play games with mobile phones is even greater. However, due to the limitation of the internal space of mobile phones, it is impossible to install cooling devices such as fans. Even if the copper pipes are cooled, they may not be as thorough as PCs. Therefore, we should try to avoid overheating in the process of using the smartphone. If you play mobile games at this time, the heat generated by the battery and the processor will be superimposed. In the long run, irreversible damage is caused to the components inside the battery and even the mobile phone. Therefore, it is not necessary to use the mobile phone as much as possible while charging.

4. Do not charge your phone on the sofa/bed. As mentioned before, fever is the culprit that shortens the battery life of mobile phones, and the mobile phone can only self-heat. If you charge on the sofa or bed, it will cause the heat of the fuselage to accumulate, causing local overheating. In addition, the sofa, bed sheets and cotton wadding are all flammable. At this time, if an accident occurs, the possibility of fire will be great.

5. Do not use the computer USB interface to charge the phone. Many people, including myself, use the USB interface of the computer to charge the phone for convenience. However, the USB interface current of many computers is less than 500mA, and the process of charging the mobile phone will be very long. What's more, the power supply mechanism of some computer motherboards is not perfect. If a variety of USB devices are connected or plugged in at the same time, the output current of the USB interface will be unstable, which is not conducive to the long-term use of the smart phone battery.

6. Do not use the charging treasure to charge the phone for a long time. Although many charging treasures can provide high current charging of more than 1A or even 2.1A, charging treasure is not a power supply after all, and cannot guarantee continuous output of voltage/current. In addition, the charging treasure itself will generate a certain amount of heat when charging the mobile phone, so it is not recommended to use the charging treasure for charging the mobile phone for a long time, and it can only be used as an emergency.

6. Do not use the phone for a long time in the case of too cold. Lithium batteries are not only afraid of heat, but also cold. In a cold environment, the activity of lithium battery and the lithium intercalation activity of the negative active material will be affected, and the battery capacity will decrease and the rate performance will decrease. When used at lower temperature conditions, lithium dendrites are formed on the surface of the negative electrode in severe cases, piercing the diaphragm and causing a safety accident. Android phones will also have a significantly shorter battery life at lower temperatures.

Other batteries you might find

Toshiba A8 3000mAh/11.4WH 3.8V

Toshiba BL267 3000MAH 3.85V

Toshiba C11P1614 5000MAH 3.85V

Toshiba HB4W1H 1750mAh 4.2V

Toshiba S8 3000MAH/11.4WH 3.8V

07:52 29.7.2019 - 0 Kommentare

Shop HUAWEI HB366179ECW battery 2300mah 3.8v, compatible with HUAWEI Nova 2 CAZ-AL10 CAZ-TL00. Best service, comfortable shopping! 1-year warranty, 30-days money back!

ECN11041_Te

  • Brand : HUAWEI Battery

  • Type : Li-ion

  • Capacity : 2850mAh/10.88WH

  • Volatge : 3.82V

HB366179ECW Replaceable universal battery model:

HB366179ECW

Perfectly compatible with HUAWEI Nova 2 CAZ-AL10 CAZ-TL00:

HUAWEI Nova 2 CAZ-AL10 CAZ-TL00Charge limit voltage: 4.4V

Mobile phone battery repair tips

1. Refrigerator freezing method. Wrap the battery in paper, then wrap it in plastic wrap and put it into the frozen layer for about 3 days. After taking it out, place it in a cool place and let it dry for two days. Try charging again.

Explanation: The process of using the mobile phone is a process of charging and discharging the battery, and the negative and positive charges in the battery collide with each other. The reason why it is more and more unreliable and troublesome is that at normal temperature, the kinetic energy of the electron is relatively large, the battery is in an active state, and the leakage is relatively frequent. When the battery is in a low temperature environment, the structure of the lithium film and the electrolyte on the surface does not change much, and the interface thereof changes significantly. The leakage current and the like are reduced, and the standby time is increased.

2. Rubber wipe method. Using a clean eraser to wipe the metal surface of the phone's battery and the phone can also improve the use.

Explanation: For a long time, the metal surface of the battery has a certain degree of oxidation, resulting in poor contact and short use time, while the rubber enamel can erase the oxide layer on the surface to make the contact better. This method is more suitable for situations where the problem is not very serious.

3. Recharge the activation method. Discharge the battery completely and recharge it again.

Detailed steps: Find two wires and connect a small 1.5-volt bulb. Connect the two ends of the wire to the positive and negative terminals of the battery. After connecting, the light bulb will emit some shimmer. Wait until the light bulb is completely extinguished and recharge. This can also be changed. Battery performance. But this method is not very effective, but it is still somewhat useful.

How to use the HB366179ECW battery correctly

1. Do not run out of battery power and then recharge. Nowadays, smart phones use lithium-ion polymer batteries, which have no so-called "memory effect" in nickel-cadmium batteries, so there is no need to run out of batteries and recharge them. In fact, if the lithium battery is in a low voltage state for a long time, it will cause the phenomenon that charging cannot occur. So when the phone's power drops to less than 20%, it should be charged. Therefore, if the mobile phone is not used for a long time, it should be kept at full power as much as possible, and it will be charged for a while.

2. Do not continue charging for a long time after the phone is fully charged. Many people like to charge while sleeping, and then unplug the charger the next day. In this way, the phone will automatically stop charging after the battery is fully charged. However, during the charging process, the battery is overheated, and even the burning takes place during charging. We should try to avoid charging the phone for a long time without being guarded.

3. Don't play the phone while charging. Nowadays, the computing power of smart phones is very powerful. Nowadays, the power to play games with mobile phones is even greater. However, due to the limitation of the internal space of mobile phones, it is impossible to install cooling devices such as fans. Even if the copper pipes are cooled, they may not be as thorough as PCs. Therefore, we should try to avoid overheating in the process of using the smartphone. If you play mobile games at this time, the heat generated by the battery and the processor will be superimposed. In the long run, irreversible damage is caused to the components inside the battery and even the mobile phone. Therefore, it is not necessary to use the mobile phone as much as possible while charging.

4. Do not charge your phone on the sofa/bed. As mentioned before, fever is the culprit that shortens the battery life of mobile phones, and the mobile phone can only self-heat. If you charge on the sofa or bed, it will cause the heat of the fuselage to accumulate, causing local overheating. In addition, the sofa, bed sheets and cotton wadding are all flammable. At this time, if an accident occurs, the possibility of fire will be great.

5. Do not use the computer USB interface to charge the phone. Many people, including myself, use the USB interface of the computer to charge the phone for convenience. However, the USB interface current of many computers is less than 500mA, and the process of charging the mobile phone will be very long. What's more, the power supply mechanism of some computer motherboards is not perfect. If a variety of USB devices are connected or plugged in at the same time, the output current of the USB interface will be unstable, which is not conducive to the long-term use of the smart phone battery.

6. Do not use the charging treasure to charge the phone for a long time. Although many charging treasures can provide high current charging of more than 1A or even 2.1A, charging treasure is not a power supply after all, and cannot guarantee continuous output of voltage/current. In addition, the charging treasure itself will generate a certain amount of heat when charging the mobile phone, so it is not recommended to use the charging treasure for charging the mobile phone for a long time, and it can only be used as an emergency.

6. Do not use the phone for a long time in the case of too cold. Lithium batteries are not only afraid of heat, but also cold. In a cold environment, the activity of lithium battery and the lithium intercalation activity of the negative active material will be affected, and the battery capacity will decrease and the rate performance will decrease. When used at lower temperature conditions, lithium dendrites are formed on the surface of the negative electrode in severe cases, piercing the diaphragm and causing a safety accident. Android phones will also have a significantly shorter battery life at lower temperatures.

Other batteries you might find

HUAWEI 4901 2500MAH/9.5WH 3.8V

HUAWEI BL-53YH 3000mAh 3.8V

HUAWEI TLI020F7 2000MAH 3.8V

HUAWEI LI3822T43P3H716042 2200mAh/8.4WH 3.8V

HUAWEI BLI-1600 1600mAh

07:51 29.7.2019 - 0 Kommentare

Shop Nokia HE351 battery 2300mah 3.8v, compatible with Nokia cellphone. Best service, comfortable shopping! 1-year warranty, 30-days money back!

ECN11043_Te

  • Brand : Nokia Battery

  • Type : Li-ion

  • Capacity : 2900mAh/11.16WH

  • Volatge : 3.85V

HE351 Replaceable universal battery model:

HE351

Perfectly compatible with Nokia cellphone:

Charge limit voltage: 4.4VNokia cellphone

Mobile phone battery repair tips

1. Refrigerator freezing method. Wrap the battery in paper, then wrap it in plastic wrap and put it into the frozen layer for about 3 days. After taking it out, place it in a cool place and let it dry for two days. Try charging again.

Explanation: The process of using the mobile phone is a process of charging and discharging the battery, and the negative and positive charges in the battery collide with each other. The reason why it is more and more unreliable and troublesome is that at normal temperature, the kinetic energy of the electron is relatively large, the battery is in an active state, and the leakage is relatively frequent. When the battery is in a low temperature environment, the structure of the lithium film and the electrolyte on the surface does not change much, and the interface thereof changes significantly. The leakage current and the like are reduced, and the standby time is increased.

2. Rubber wipe method. Using a clean eraser to wipe the metal surface of the phone's battery and the phone can also improve the use.

Explanation: For a long time, the metal surface of the battery has a certain degree of oxidation, resulting in poor contact and short use time, while the rubber enamel can erase the oxide layer on the surface to make the contact better. This method is more suitable for situations where the problem is not very serious.

3. Recharge the activation method. Discharge the battery completely and recharge it again.

Detailed steps: Find two wires and connect a small 1.5-volt bulb. Connect the two ends of the wire to the positive and negative terminals of the battery. After connecting, the light bulb will emit some shimmer. Wait until the light bulb is completely extinguished and recharge. This can also be changed. Battery performance. But this method is not very effective, but it is still somewhat useful.

How to use the HE351 battery correctly

1. Do not run out of battery power and then recharge. Nowadays, smart phones use lithium-ion polymer batteries, which have no so-called "memory effect" in nickel-cadmium batteries, so there is no need to run out of batteries and recharge them. In fact, if the lithium battery is in a low voltage state for a long time, it will cause the phenomenon that charging cannot occur. So when the phone's power drops to less than 20%, it should be charged. Therefore, if the mobile phone is not used for a long time, it should be kept at full power as much as possible, and it will be charged for a while.

2. Do not continue charging for a long time after the phone is fully charged. Many people like to charge while sleeping, and then unplug the charger the next day. In this way, the phone will automatically stop charging after the battery is fully charged. However, during the charging process, the battery is overheated, and even the burning takes place during charging. We should try to avoid charging the phone for a long time without being guarded.

3. Don't play the phone while charging. Nowadays, the computing power of smart phones is very powerful. Nowadays, the power to play games with mobile phones is even greater. However, due to the limitation of the internal space of mobile phones, it is impossible to install cooling devices such as fans. Even if the copper pipes are cooled, they may not be as thorough as PCs. Therefore, we should try to avoid overheating in the process of using the smartphone. If you play mobile games at this time, the heat generated by the battery and the processor will be superimposed. In the long run, irreversible damage is caused to the components inside the battery and even the mobile phone. Therefore, it is not necessary to use the mobile phone as much as possible while charging.

4. Do not charge your phone on the sofa/bed. As mentioned before, fever is the culprit that shortens the battery life of mobile phones, and the mobile phone can only self-heat. If you charge on the sofa or bed, it will cause the heat of the fuselage to accumulate, causing local overheating. In addition, the sofa, bed sheets and cotton wadding are all flammable. At this time, if an accident occurs, the possibility of fire will be great.

5. Do not use the computer USB interface to charge the phone. Many people, including myself, use the USB interface of the computer to charge the phone for convenience. However, the USB interface current of many computers is less than 500mA, and the process of charging the mobile phone will be very long. What's more, the power supply mechanism of some computer motherboards is not perfect. If a variety of USB devices are connected or plugged in at the same time, the output current of the USB interface will be unstable, which is not conducive to the long-term use of the smart phone battery.

6. Do not use the charging treasure to charge the phone for a long time. Although many charging treasures can provide high current charging of more than 1A or even 2.1A, charging treasure is not a power supply after all, and cannot guarantee continuous output of voltage/current. In addition, the charging treasure itself will generate a certain amount of heat when charging the mobile phone, so it is not recommended to use the charging treasure for charging the mobile phone for a long time, and it can only be used as an emergency.

6. Do not use the phone for a long time in the case of too cold. Lithium batteries are not only afraid of heat, but also cold. In a cold environment, the activity of lithium battery and the lithium intercalation activity of the negative active material will be affected, and the battery capacity will decrease and the rate performance will decrease. When used at lower temperature conditions, lithium dendrites are formed on the surface of the negative electrode in severe cases, piercing the diaphragm and causing a safety accident. Android phones will also have a significantly shorter battery life at lower temperatures.

Other batteries you might find

Nokia K6000 6000mAh/22.8WH 3.8V

Nokia LIP1624ERPC 2700mAh 3.8V

Nokia C8 3000mAh/11.4WH 3.8V

Nokia FX30 2810mAh 3.8V

Nokia 616-0772 2915mAh 3.82V

07:51 29.7.2019 - 0 Kommentare

Shop Xiaomi BM3C battery 2300mah 3.8v, compatible with Xiaomi 7 Mi7. Best service, comfortable shopping! 1-year warranty, 30-days money back!

ECN11044_Te

  • Brand : Xiaomi Battery

  • Type : Li-ion

  • Capacity : 3070mAh/11.8WH

  • Volatge : 3.85V

BM3C Replaceable universal battery model:

BM3C

Perfectly compatible with Xiaomi 7 Mi7:

Xiaomi 7 Mi7Charge limit voltage: 4.4V

Mobile phone battery repair tips

1. Refrigerator freezing method. Wrap the battery in paper, then wrap it in plastic wrap and put it into the frozen layer for about 3 days. After taking it out, place it in a cool place and let it dry for two days. Try charging again.

Explanation: The process of using the mobile phone is a process of charging and discharging the battery, and the negative and positive charges in the battery collide with each other. The reason why it is more and more unreliable and troublesome is that at normal temperature, the kinetic energy of the electron is relatively large, the battery is in an active state, and the leakage is relatively frequent. When the battery is in a low temperature environment, the structure of the lithium film and the electrolyte on the surface does not change much, and the interface thereof changes significantly. The leakage current and the like are reduced, and the standby time is increased.

2. Rubber wipe method. Using a clean eraser to wipe the metal surface of the phone's battery and the phone can also improve the use.

Explanation: For a long time, the metal surface of the battery has a certain degree of oxidation, resulting in poor contact and short use time, while the rubber enamel can erase the oxide layer on the surface to make the contact better. This method is more suitable for situations where the problem is not very serious.

3. Recharge the activation method. Discharge the battery completely and recharge it again.

Detailed steps: Find two wires and connect a small 1.5-volt bulb. Connect the two ends of the wire to the positive and negative terminals of the battery. After connecting, the light bulb will emit some shimmer. Wait until the light bulb is completely extinguished and recharge. This can also be changed. Battery performance. But this method is not very effective, but it is still somewhat useful.

How to use the BM3C battery correctly

1. Do not run out of battery power and then recharge. Nowadays, smart phones use lithium-ion polymer batteries, which have no so-called "memory effect" in nickel-cadmium batteries, so there is no need to run out of batteries and recharge them. In fact, if the lithium battery is in a low voltage state for a long time, it will cause the phenomenon that charging cannot occur. So when the phone's power drops to less than 20%, it should be charged. Therefore, if the mobile phone is not used for a long time, it should be kept at full power as much as possible, and it will be charged for a while.

2. Do not continue charging for a long time after the phone is fully charged. Many people like to charge while sleeping, and then unplug the charger the next day. In this way, the phone will automatically stop charging after the battery is fully charged. However, during the charging process, the battery is overheated, and even the burning takes place during charging. We should try to avoid charging the phone for a long time without being guarded.

3. Don't play the phone while charging. Nowadays, the computing power of smart phones is very powerful. Nowadays, the power to play games with mobile phones is even greater. However, due to the limitation of the internal space of mobile phones, it is impossible to install cooling devices such as fans. Even if the copper pipes are cooled, they may not be as thorough as PCs. Therefore, we should try to avoid overheating in the process of using the smartphone. If you play mobile games at this time, the heat generated by the battery and the processor will be superimposed. In the long run, irreversible damage is caused to the components inside the battery and even the mobile phone. Therefore, it is not necessary to use the mobile phone as much as possible while charging.

4. Do not charge your phone on the sofa/bed. As mentioned before, fever is the culprit that shortens the battery life of mobile phones, and the mobile phone can only self-heat. If you charge on the sofa or bed, it will cause the heat of the fuselage to accumulate, causing local overheating. In addition, the sofa, bed sheets and cotton wadding are all flammable. At this time, if an accident occurs, the possibility of fire will be great.

5. Do not use the computer USB interface to charge the phone. Many people, including myself, use the USB interface of the computer to charge the phone for convenience. However, the USB interface current of many computers is less than 500mA, and the process of charging the mobile phone will be very long. What's more, the power supply mechanism of some computer motherboards is not perfect. If a variety of USB devices are connected or plugged in at the same time, the output current of the USB interface will be unstable, which is not conducive to the long-term use of the smart phone battery.

6. Do not use the charging treasure to charge the phone for a long time. Although many charging treasures can provide high current charging of more than 1A or even 2.1A, charging treasure is not a power supply after all, and cannot guarantee continuous output of voltage/current. In addition, the charging treasure itself will generate a certain amount of heat when charging the mobile phone, so it is not recommended to use the charging treasure for charging the mobile phone for a long time, and it can only be used as an emergency.

6. Do not use the phone for a long time in the case of too cold. Lithium batteries are not only afraid of heat, but also cold. In a cold environment, the activity of lithium battery and the lithium intercalation activity of the negative active material will be affected, and the battery capacity will decrease and the rate performance will decrease. When used at lower temperature conditions, lithium dendrites are formed on the surface of the negative electrode in severe cases, piercing the diaphragm and causing a safety accident. Android phones will also have a significantly shorter battery life at lower temperatures.

Other batteries you might find

Xiaomi LI3831T43P4H826247 3080mAh 3.8V

Xiaomi BL7000 7060MAH 3.8V

Xiaomi 178088746 1400mAh 3.7V

Xiaomi BL-46ZH 2045mAh/7.8WH 3.8V

Xiaomi HB396070NPCA 2750mAh/10.51WH 3.82V

07:51 29.7.2019 - 0 Kommentare

Shop ALCATEL TLP020K2 battery 2300mah 3.8v, compatible with ALCATEL One Touch 6039H 6039Y 6039K. Best service, comfortable shopping! 1-year warranty, 30-days money back!

ECN11042_Te

  • Brand : ALCATEL Battery

  • Type : Li-ion

  • Capacity : 2000mAh/7.6WH

  • Volatge : 3.8V

TLP020K2 Replaceable universal battery model:

TLp020K2

Perfectly compatible with ALCATEL One Touch 6039H 6039Y 6039K:

ALCATEL One Touch 6039H 6039Y 6039KCharge limit voltage: 4.35V

Mobile phone battery repair tips

1. Refrigerator freezing method. Wrap the battery in paper, then wrap it in plastic wrap and put it into the frozen layer for about 3 days. After taking it out, place it in a cool place and let it dry for two days. Try charging again.

Explanation: The process of using the mobile phone is a process of charging and discharging the battery, and the negative and positive charges in the battery collide with each other. The reason why it is more and more unreliable and troublesome is that at normal temperature, the kinetic energy of the electron is relatively large, the battery is in an active state, and the leakage is relatively frequent. When the battery is in a low temperature environment, the structure of the lithium film and the electrolyte on the surface does not change much, and the interface thereof changes significantly. The leakage current and the like are reduced, and the standby time is increased.

2. Rubber wipe method. Using a clean eraser to wipe the metal surface of the phone's battery and the phone can also improve the use.

Explanation: For a long time, the metal surface of the battery has a certain degree of oxidation, resulting in poor contact and short use time, while the rubber enamel can erase the oxide layer on the surface to make the contact better. This method is more suitable for situations where the problem is not very serious.

3. Recharge the activation method. Discharge the battery completely and recharge it again.

Detailed steps: Find two wires and connect a small 1.5-volt bulb. Connect the two ends of the wire to the positive and negative terminals of the battery. After connecting, the light bulb will emit some shimmer. Wait until the light bulb is completely extinguished and recharge. This can also be changed. Battery performance. But this method is not very effective, but it is still somewhat useful.

How to use the TLP020K2 battery correctly

1. Do not run out of battery power and then recharge. Nowadays, smart phones use lithium-ion polymer batteries, which have no so-called "memory effect" in nickel-cadmium batteries, so there is no need to run out of batteries and recharge them. In fact, if the lithium battery is in a low voltage state for a long time, it will cause the phenomenon that charging cannot occur. So when the phone's power drops to less than 20%, it should be charged. Therefore, if the mobile phone is not used for a long time, it should be kept at full power as much as possible, and it will be charged for a while.

2. Do not continue charging for a long time after the phone is fully charged. Many people like to charge while sleeping, and then unplug the charger the next day. In this way, the phone will automatically stop charging after the battery is fully charged. However, during the charging process, the battery is overheated, and even the burning takes place during charging. We should try to avoid charging the phone for a long time without being guarded.

3. Don't play the phone while charging. Nowadays, the computing power of smart phones is very powerful. Nowadays, the power to play games with mobile phones is even greater. However, due to the limitation of the internal space of mobile phones, it is impossible to install cooling devices such as fans. Even if the copper pipes are cooled, they may not be as thorough as PCs. Therefore, we should try to avoid overheating in the process of using the smartphone. If you play mobile games at this time, the heat generated by the battery and the processor will be superimposed. In the long run, irreversible damage is caused to the components inside the battery and even the mobile phone. Therefore, it is not necessary to use the mobile phone as much as possible while charging.

4. Do not charge your phone on the sofa/bed. As mentioned before, fever is the culprit that shortens the battery life of mobile phones, and the mobile phone can only self-heat. If you charge on the sofa or bed, it will cause the heat of the fuselage to accumulate, causing local overheating. In addition, the sofa, bed sheets and cotton wadding are all flammable. At this time, if an accident occurs, the possibility of fire will be great.

5. Do not use the computer USB interface to charge the phone. Many people, including myself, use the USB interface of the computer to charge the phone for convenience. However, the USB interface current of many computers is less than 500mA, and the process of charging the mobile phone will be very long. What's more, the power supply mechanism of some computer motherboards is not perfect. If a variety of USB devices are connected or plugged in at the same time, the output current of the USB interface will be unstable, which is not conducive to the long-term use of the smart phone battery.

6. Do not use the charging treasure to charge the phone for a long time. Although many charging treasures can provide high current charging of more than 1A or even 2.1A, charging treasure is not a power supply after all, and cannot guarantee continuous output of voltage/current. In addition, the charging treasure itself will generate a certain amount of heat when charging the mobile phone, so it is not recommended to use the charging treasure for charging the mobile phone for a long time, and it can only be used as an emergency.

6. Do not use the phone for a long time in the case of too cold. Lithium batteries are not only afraid of heat, but also cold. In a cold environment, the activity of lithium battery and the lithium intercalation activity of the negative active material will be affected, and the battery capacity will decrease and the rate performance will decrease. When used at lower temperature conditions, lithium dendrites are formed on the surface of the negative electrode in severe cases, piercing the diaphragm and causing a safety accident. Android phones will also have a significantly shorter battery life at lower temperatures.

Other batteries you might find

ALCATEL A101 2450mAh 3.8V

ALCATEL AB4000DWMV 4000mAh/15.4WH 3.85V

ALCATEL LI3822T43P3H736044 2200mAh/8.4WH 3.8V

ALCATEL 4901 2500MAH/9.5WH 3.8V

ALCATEL BL-N3500 3520mAh 3.8V

03:18 18.7.2019 - 0 Kommentare

The new HP EO04XL laptop battery, 38Wh 7.7V, is suitable for battery HP EliteBook Folio G1 HSTNN-I73C HSTNN-IB71 827927-1B1. Superior quality and cheap price! 1 year warranty, 30 days money-back guarantee!

HPQ19I176_1

  • Brand : HP Battery

  • Type : Li-ion

  • Capacity : 38Wh

  • Volatge : 7.7V

EO04XL Replaceable universal battery model:

EO04XL 827927-1B1 827927-1C1 828226-005 E004XL HSTNN-I73C HSTNN-IB71 HSTNN-IB7I

Perfectly compatible with HP EliteBook Folio G1 HSTNN-I73C HSTNN-IB71 827927-1B1:

for HP EliteBook Folio G1

Why the laptop can't be charged

1. The laptop battery management software disables the charging function.2. Laptop battery aging or daily careless maintenance, often use the battery power to exhaust until the computer automatically shuts down. In fact, this is very easy to damage the battery.3. Some users will take out the laptop battery for a long time, put it away, this kind of battery will be taken down and stored, it will also lose the battery, which will make the battery life of the laptop worse and worse.

EO04XL Notebook battery charging shows 0% available power is turned on and can not be charged solution

1. Check if the battery charging is disabled. If the user sets the laptop battery, the laptop battery management software disables the charging function2. If there is no problem with the check settings, if the laptop battery is used for a long time, the over-discharge will cause 0% of the available power is turned on and not charged. If it is taken for repair, even if it is repaired, there will be problems such as battery life and long life. It is best to buy. Replace with a new laptop battery.3. The battery has been used for too long, it is useless, resulting in poor contact, it is recommended to open the notebook clear gray, plug the power cord battery to try.4. notebook win7 system battery internal control circuit or battery core problems, need to take over.iPhone battery disassembly process (iPhone6s Plus as an example)

HOT SALES

NEC PC-VP-BP86 BATTERY-2900mAh/33Wh For NEC LZ550 LZ750JS LZ550/JS Series

HP DR02XL BATTERY-5676mAh/43.7WH For HP Chromebook 11 G5 HSTNN-IB7M 859027-121

LENOVO SB10J78991 BATTERY-3575mAh/42WH  For Lenovo ThinkPad Yoga 11E 3rd Gen

HP GM02XL BATTERY-6000mAh/47.3WH For HP 11-AE 11-AE131NR (DF14)

GETAC VFXSV-00-12-4S2P-0 BATTERY-5800mAh

More batteries for your reference

Asus C21-TX300P 5000mah 7.6v

Acer SQU-1605 2700MAH 17.6V

SONY VGP-BPL24 11.1V

Gigabyte NC-H40 4300mAh 14.8V

Dell F3YG 60Wh 7.6V

03:18 18.7.2019 - 0 Kommentare

Shop Meizu BA871 battery 2300mah 3.8v, compatible with Meizu MeiLan M15 M871Q battery. Best service, comfortable shopping! 1-year warranty, 30-days money back!

ECN11025_Te

  • Brand : Meizu Battery

  • Type : Li-ion

  • Capacity : 3000mAh/11.55WH

  • Volatge : 3.85V

BA871 Replaceable universal battery model:

BA871

Perfectly compatible with Meizu MeiLan M15 M871Q:

For Meizu MeiLan M15 M871QCharge limit voltage: 4.4V

Mobile phone battery repair tips

1. Refrigerator freezing method. Wrap the battery in paper, then wrap it in plastic wrap and put it into the frozen layer for about 3 days. After taking it out, place it in a cool place and let it dry for two days. Try charging again.Explanation: The process of using the mobile phone is a process of charging and discharging the battery, and the negative and positive charges in the battery collide with each other. The reason why it is more and more unreliable and troublesome is that at normal temperature, the kinetic energy of the electron is relatively large, the battery is in an active state, and the leakage is relatively frequent. When the battery is in a low temperature environment, the structure of the lithium film and the electrolyte on the surface does not change much, and the interface thereof changes significantly. The leakage current and the like are reduced, and the standby time is increased.2. Rubber wipe method. Using a clean eraser to wipe the metal surface of the phone's battery and the phone can also improve the use.Explanation: For a long time, the metal surface of the battery has a certain degree of oxidation, resulting in poor contact and short use time, while the rubber enamel can erase the oxide layer on the surface to make the contact better. This method is more suitable for situations where the problem is not very serious.3. Recharge the activation method. Discharge the battery completely and recharge it again.Detailed steps: Find two wires and connect a small 1.5-volt bulb. Connect the two ends of the wire to the positive and negative terminals of the battery. After connecting, the light bulb will emit some shimmer. Wait until the light bulb is completely extinguished and recharge. This can also be changed. Battery performance. But this method is not very effective, but it is still somewhat useful.

How to use the Meizu BA871 battery correctly

1. Do not run out of battery power and then recharge. Nowadays, smart phones use lithium-ion polymer batteries, which have no so-called "memory effect" in nickel-cadmium batteries, so there is no need to run out of batteries and recharge them. In fact, if the lithium battery is in a low voltage state for a long time, it will cause the phenomenon that charging cannot occur. So when the phone's power drops to less than 20%, it should be charged. Therefore, if the mobile phone is not used for a long time, it should be kept at full power as much as possible, and it will be charged for a while.2. Do not continue charging for a long time after the phone is fully charged. Many people like to charge while sleeping, and then unplug the charger the next day. In this way, the phone will automatically stop charging after the battery is fully charged. However, during the charging process, the battery is overheated, and even the burning takes place during charging. We should try to avoid charging the phone for a long time without being guarded.3. Don't play the phone while charging. Nowadays, the computing power of smart phones is very powerful. Nowadays, the power to play games with mobile phones is even greater. However, due to the limitation of the internal space of mobile phones, it is impossible to install cooling devices such as fans. Even if the copper pipes are cooled, they may not be as thorough as PCs. Therefore, we should try to avoid overheating in the process of using the smartphone. If you play mobile games at this time, the heat generated by the battery and the processor will be superimposed. In the long run, irreversible damage is caused to the components inside the battery and even the mobile phone. Therefore, it is not necessary to use the mobile phone as much as possible while charging.4. Do not charge your phone on the sofa/bed. As mentioned before, fever is the culprit that shortens the battery life of mobile phones, and the mobile phone can only self-heat. If you charge on the sofa or bed, it will cause the heat of the fuselage to accumulate, causing local overheating. In addition, the sofa, bed sheets and cotton wadding are all flammable. At this time, if an accident occurs, the possibility of fire will be great.5. Do not use the computer USB interface to charge the phone. Many people, including myself, use the USB interface of the computer to charge the phone for convenience. However, the USB interface current of many computers is less than 500mA, and the process of charging the mobile phone will be very long. What's more, the power supply mechanism of some computer motherboards is not perfect. If a variety of USB devices are connected or plugged in at the same time, the output current of the USB interface will be unstable, which is not conducive to the long-term use of the smart phone battery.6. Do not use the charging treasure to charge the phone for a long time. Although many charging treasures can provide high current charging of more than 1A or even 2.1A, charging treasure is not a power supply after all, and cannot guarantee continuous output of voltage/current. In addition, the charging treasure itself will generate a certain amount of heat when charging the mobile phone, so it is not recommended to use the charging treasure for charging the mobile phone for a long time, and it can only be used as an emergency.6. Do not use the phone for a long time in the case of too cold. Lithium batteries are not only afraid of heat, but also cold. In a cold environment, the activity of lithium battery and the lithium intercalation activity of the negative active material will be affected, and the battery capacity will decrease and the rate performance will decrease. When used at lower temperature conditions, lithium dendrites are formed on the surface of the negative electrode in severe cases, piercing the diaphragm and causing a safety accident. Android phones will also have a significantly shorter battery life at lower temperatures.

Other batteries you might find

Alcatel TLP050BC 5000mAh 4.35V

Oukitel K10000_PRO 10000MAH 3.8V

Asus C11-A80 2400mah 3.8V

Blackview V376073P 2800mAh/10.64WH 3.8V

AIGO BP6378105-40BAG 4000mAh 3.8V

03:17 18.7.2019 - 0 Kommentare

Buy Dell DPS-460DB-15 POWER SUPPLY 100-240V-/ 8A, 50-60Hz 460W; +12VA==/18A +12VB==/16A +12VC==/8A +5V==/25A +3.3V==/17A +5Vaux==/3A for Dell Alienware Aurora R5 R6 R7. 100% compatible, quality guaranteed. 1-year warranty, 30-days money-back.

DEL17866_Se_1

  • Brand : Dell power supply

  • Input Voltage : 460W; +12VA==/18A +12VB==/16A +12VC==/8A +5V==/25A +3.3V==/17A +5Vaux==/3A

  • Out Voltage : 100-240V-/ 8A, 50-60Hz

DPS-460DB-15 replacement model:

D460AM-01 D460AM-02 D460AM-03 AC460AM-01 AC460AD-01 HU460AD-01 HU460AM-00 PC9004 DPS-460DB-4_A

Compatiblet with Dell Alienware Aurora R5 R6 R7:

DP/N: FVGCW HMCPC GJXN1 DM1RW RH8P5 6GPR9 6GXM0 7YC7C DGX9R WC1T4DELL Insprion 5675 5680DELL XPS 8100 8300 8500 8700 8910 8920 8930Dell Alienware Aurora R5 R6 R7Connector:1 X Notebook mini drive Mini-SATA interface4 X SATA,1 X 24PIN1 X 4PIN1 X graphics 6PIN1 X 8PIN

How to maintain Dell DPS-460DB-15 computer power supply

1. Remove the fan. Disconnect the main power supply first, and unplug the input and output cables on the back of the power supply. Next, unplug and connect all the accessories connected to the power supply, remove the fixing screws of the power supply box, and take out the power supply box. Observe the appearance of the power supply box, remove the screws reasonably and accurately, and remove the cover. When taking the cover, the wires should be pulled out according to the gap at the same time. Remove the four screws that secure the fan and remove the fan. You can not solder the two power cables temporarily.2. Clean the dust. After separating the power supply board and the fan with cardboard, use a small brush or a damp cloth to wipe the dust and wipe it clean. It is also possible to use dust from the fan to blow fan blades and bearings.3. Add lubricant. Peel off the sticker and use a needle-nose pliers to pick out the rubber seal. Find the motor bearing, add lubricant, and when you use the fan to move the fan, make the lubricant flow evenly along the bearing, then add a few drops. Pay attention to whether the fan of the ball bearing has two bearings. Don't neglect the oil feeding to the bearing on the wind side. The oil can't be placed on the main shaft only. Lubricating oils must use computer-specific lubricants or advanced lightweight sewing machine oils. Never use the lubricants used in automobiles. Finally, install the rubber sealing sheet and label it.

other products

Dell MPX3V 100-240V 50-60Hz

FSP FSP270-60LE

HP 503376-001 100-240V-/4A.50-60 Hz

LENOVO 54Y8861 100-240V``47--63HZ

Dell 6W6M1 100V - 240V

03:17 18.7.2019 - 0 Kommentare

Shop Meizu BA-871 battery 2300mah 3.8v, compatible with Meizu MeiLan M15 battery. Best service, comfortable shopping! 1-year warranty, 30-days money back!

ECN11029_Te

  • Brand : Meizu Battery

  • Type : Li-ion

  • Capacity : 3000mAh/11.55WH

  • Volatge : 3.85V

BA-871 Replaceable universal battery model:

BA-871

Perfectly compatible with Meizu MeiLan M15:

Charge limit voltage: 4.4VFor Meizu MeiLan M15 M871Q

Mobile phone battery repair tips

1. Refrigerator freezing method. Wrap the battery in paper, then wrap it in plastic wrap and put it into the frozen layer for about 3 days. After taking it out, place it in a cool place and let it dry for two days. Try charging again.Explanation: The process of using the mobile phone is a process of charging and discharging the battery, and the negative and positive charges in the battery collide with each other. The reason why it is more and more unreliable and troublesome is that at normal temperature, the kinetic energy of the electron is relatively large, the battery is in an active state, and the leakage is relatively frequent. When the battery is in a low temperature environment, the structure of the lithium film and the electrolyte on the surface does not change much, and the interface thereof changes significantly. The leakage current and the like are reduced, and the standby time is increased.2. Rubber wipe method. Using a clean eraser to wipe the metal surface of the phone's battery and the phone can also improve the use.Explanation: For a long time, the metal surface of the battery has a certain degree of oxidation, resulting in poor contact and short use time, while the rubber enamel can erase the oxide layer on the surface to make the contact better. This method is more suitable for situations where the problem is not very serious.3. Recharge the activation method. Discharge the battery completely and recharge it again.Detailed steps: Find two wires and connect a small 1.5-volt bulb. Connect the two ends of the wire to the positive and negative terminals of the battery. After connecting, the light bulb will emit some shimmer. Wait until the light bulb is completely extinguished and recharge. This can also be changed. Battery performance. But this method is not very effective, but it is still somewhat useful.

How to use the Meizu BA-871 battery correctly

1. Do not run out of battery power and then recharge. Nowadays, smart phones use lithium-ion polymer batteries, which have no so-called "memory effect" in nickel-cadmium batteries, so there is no need to run out of batteries and recharge them. In fact, if the lithium battery is in a low voltage state for a long time, it will cause the phenomenon that charging cannot occur. So when the phone's power drops to less than 20%, it should be charged. Therefore, if the mobile phone is not used for a long time, it should be kept at full power as much as possible, and it will be charged for a while.2. Do not continue charging for a long time after the phone is fully charged. Many people like to charge while sleeping, and then unplug the charger the next day. In this way, the phone will automatically stop charging after the battery is fully charged. However, during the charging process, the battery is overheated, and even the burning takes place during charging. We should try to avoid charging the phone for a long time without being guarded.3. Don't play the phone while charging. Nowadays, the computing power of smart phones is very powerful. Nowadays, the power to play games with mobile phones is even greater. However, due to the limitation of the internal space of mobile phones, it is impossible to install cooling devices such as fans. Even if the copper pipes are cooled, they may not be as thorough as PCs. Therefore, we should try to avoid overheating in the process of using the smartphone. If you play mobile games at this time, the heat generated by the battery and the processor will be superimposed. In the long run, irreversible damage is caused to the components inside the battery and even the mobile phone. Therefore, it is not necessary to use the mobile phone as much as possible while charging.4. Do not charge your phone on the sofa/bed. As mentioned before, fever is the culprit that shortens the battery life of mobile phones, and the mobile phone can only self-heat. If you charge on the sofa or bed, it will cause the heat of the fuselage to accumulate, causing local overheating. In addition, the sofa, bed sheets and cotton wadding are all flammable. At this time, if an accident occurs, the possibility of fire will be great.5. Do not use the computer USB interface to charge the phone. Many people, including myself, use the USB interface of the computer to charge the phone for convenience. However, the USB interface current of many computers is less than 500mA, and the process of charging the mobile phone will be very long. What's more, the power supply mechanism of some computer motherboards is not perfect. If a variety of USB devices are connected or plugged in at the same time, the output current of the USB interface will be unstable, which is not conducive to the long-term use of the smart phone battery.6. Do not use the charging treasure to charge the phone for a long time. Although many charging treasures can provide high current charging of more than 1A or even 2.1A, charging treasure is not a power supply after all, and cannot guarantee continuous output of voltage/current. In addition, the charging treasure itself will generate a certain amount of heat when charging the mobile phone, so it is not recommended to use the charging treasure for charging the mobile phone for a long time, and it can only be used as an emergency.6. Do not use the phone for a long time in the case of too cold. Lithium batteries are not only afraid of heat, but also cold. In a cold environment, the activity of lithium battery and the lithium intercalation activity of the negative active material will be affected, and the battery capacity will decrease and the rate performance will decrease. When used at lower temperature conditions, lithium dendrites are formed on the surface of the negative electrode in severe cases, piercing the diaphragm and causing a safety accident. Android phones will also have a significantly shorter battery life at lower temperatures.

Other batteries you might find

Motorola EZ30 3025mAh 3.8V

JIAYU JY-G4 3000mah 3.7V

Philips AB2400AWMC 2400mAh 3.7V

Leagoo BT-591 4000mAh/15.4WH 3.85V

Lenovo BL203 1500mah 3.7V

03:17 18.7.2019 - 0 Kommentare

The new Lenovo L16M3P24 laptop battery, 3910mAh / 45Wh 11.52V, is suitable for battery Lenovo Ideapad Xiaoxin 700 Savior R720. Superior quality and cheap price! 1 year warranty, 30 days money-back guarantee!

LEN19J526

  • Brand : Lenovo Battery

  • Type : Li-ion

  • Capacity : 3910mAh / 45Wh

  • Volatge : 11.52V

L16M3P24 Replaceable universal battery model:

L16M3P24 L16S3P24 3ICP6/54/91

Perfectly compatible with Lenovo Ideapad Xiaoxin 700 Savior R720:

Lenovo Ideapad Savior R720 Lenovo Ideapad Xiaoxin 700 Series

Why the laptop can't be charged

1. The laptop battery management software disables the charging function.2. Laptop battery aging or daily careless maintenance, often use the battery power to exhaust until the computer automatically shuts down. In fact, this is very easy to damage the battery.3. Some users will take out the laptop battery for a long time, put it away, this kind of battery will be taken down and stored, it will also lose the battery, which will make the battery life of the laptop worse and worse.

L16M3P24 Notebook battery charging shows 0% available power is turned on and can not be charged solution

1. Check if the battery charging is disabled. If the user sets the laptop battery, the laptop battery management software disables the charging function2. If there is no problem with the check settings, if the laptop battery is used for a long time, the over-discharge will cause 0% of the available power is turned on and not charged. If it is taken for repair, even if it is repaired, there will be problems such as battery life and long life. It is best to buy. Replace with a new laptop battery.3. The battery has been used for too long, it is useless, resulting in poor contact, it is recommended to open the notebook clear gray, plug the power cord battery to try.4. notebook win7 system battery internal control circuit or battery core problems, need to take over.iPhone battery disassembly process (iPhone6s Plus as an example)

HOT SALES

NEC PC-VP-BP86 BATTERY-2900mAh/33Wh For NEC LZ550 LZ750JS LZ550/JS Series

HP DR02XL BATTERY-5676mAh/43.7WH For HP Chromebook 11 G5 HSTNN-IB7M 859027-121

LENOVO SB10J78991 BATTERY-3575mAh/42WH  For Lenovo ThinkPad Yoga 11E 3rd Gen

HP GM02XL BATTERY-6000mAh/47.3WH For HP 11-AE 11-AE131NR (DF14)

GETAC VFXSV-00-12-4S2P-0 BATTERY-5800mAh

More batteries for your reference

HP 778951-421 15.2V

SAMSUNG AA-PBVN3AB 3780MAH 11.4V

HP PP02XL 4680mAh/37WH 7.6V

Dell 1KFH3 14.8V

Hasee A3222-H54 4400mah 10.8V

07:54 1.7.2019 - 0 Kommentare

Hp HS03 battery is compatible with HP 240 G4 250 G4 14G 14Q 15G 15Q,value price and high-quality performance.

  • product compatibility:

    • HP 240 G4 SeriesHP 245 G4 SeriesHP 246 G4 SeriesHP 250 G4 SeriesHP 255 G4 SeriesHP 256 G4 SeriesHP Notebook 14 SeriesHP Notebook 14g SeriesHP Notebook 15 SeriesHP Notebook 15g SeriesHP Notebook 14q SeriesHP Notebook 15q Series

not compatible with14.8V and 14.4V

  • ● Our batteries are 100% new and CE / FCC / RoHS certified for safety

  • ● We only use high quality materials and grade A cells to guarantee real capacity and higher recharge cycles.

  • ● Quick, friendly and trouble-free customer support and a full one-year warranty: if something goes wrong, we are at your disposal.

  • Instructions for Use

    • 1. New Hp HS03 battery needs to be fully charged and discharged (cycled) a few times before it can condition to full capacity.

    • 2. Rechargeable batteries undergo self-discharging when left unused. Always store a HS03 battery pack in a fully charged stage for storage.

    • 3. Fully drain and fully recharge your battery pack every few month.

    • 4. Li-ion and NiMH battery can not interchangeable.

    • 5. Turn down the LCD brightness of your portable device.

https://www.batteryclub.org/Goods/HPQ2552-HS03-Hp-Battery.html

Here, we provide other products for your reference:

ASUS C11P1618 3300mAh/12.5WH 3.85V

Medion A41-D17 3000mAh/45Wh 15V

Lenovo SB10F46456 4200mah/32Wh 7.6V

HP OM03XL 57Wh 11.55V

Alcatel TLP025G2 2580MAH 3.8V

LG BL-T24 4100Mah 3.85V

Bose 061384 2230mAH 7.4V

LENOVO L14C3K31 9600mAh 3.75V

HP 778951-421 15.2V

HP 503376-001 100-240V-/4A.50-60 Hz

07:53 1.7.2019 - 0 Kommentare

Asus C31N1517 battery is compatible with ASUS TP301 TP301UA TP301UJ,value price and high-quality performance.

Brand : Asus
Capacity : 4780mAh
Voltage : 11.55V

  • ● Our batteries are 100% new and CE / FCC / RoHS certified for safety

  • ● We only use high quality materials and grade A cells to guarantee real capacity and higher recharge cycles.

  • ● Quick, friendly and trouble-free customer support and a full one-year warranty: if something goes wrong, we are at your disposal.

  • product compatibility:

    • ASUS TP301, TP301U, TP301UA, TP301UA6200, TP301UA6500, TP301UJ, VivoBook Flip TP301UA, VivoBook Flip TP301UJ

  • Instructions for Use

    • 1. New Asus C31N1517 battery needs to be fully charged and discharged (cycled) a few times before it can condition to full capacity.

    • 2. Rechargeable batteries undergo self-discharging when left unused. Always store a C31N1517 battery pack in a fully charged stage for storage.

    • 3. Fully drain and fully recharge your battery pack every few month.

    • 4. Li-ion and NiMH battery can not interchangeable.

    • 5. Turn down the LCD brightness of your portable device.

https://www.batteryclub.org/Goods/ASU2768-C31N1517-Asus-Battery.html

Here, we provide other products for your reference:

ASUS C11P1618 3300mAh/12.5WH 3.85V

Medion A41-D17 3000mAh/45Wh 15V

Lenovo SB10F46456 4200mah/32Wh 7.6V

HP OM03XL 57Wh 11.55V

Alcatel TLP025G2 2580MAH 3.8V

LG BL-T24 4100Mah 3.85V

Bose 061384 2230mAH 7.4V

LENOVO L14C3K31 9600mAh 3.75V

HP 778951-421 15.2V

HP 503376-001 100-240V-/4A.50-60 Hz

07:52 1.7.2019 - 0 Kommentare

Razer BETTY4 battery is compatible with Razer Blade 2016 14 V2,value price and high-quality performance.

  • ● Our batteries are 100% new and CE / FCC / RoHS certified for safety

  • ● We only use high quality materials and grade A cells to guarantee real capacity and higher recharge cycles.

  • ● Quick, friendly and trouble-free customer support and a full one-year warranty: if something goes wrong, we are at your disposal.

Brand : Razer
Capacity : 6160mah
Voltage : 11.4V

  • Replaceability with the following models:

  • product compatibility:

    • RAZER blade 2016 14Razer Blade 2016Razer Blade 2016 14Razer Blade 2016 v2

  • Instructions for Use

    • 1. New Razer BETTY4 battery needs to be fully charged and discharged (cycled) a few times before it can condition to full capacity.

    • 2. Rechargeable batteries undergo self-discharging when left unused. Always store a BETTY4 battery pack in a fully charged stage for storage.

    • 3. Fully drain and fully recharge your battery pack every few month.

    • 4. Li-ion and NiMH battery can not interchangeable.

    • 5. Turn down the LCD brightness of your portable device.

https://www.batteryclub.org/Goods/RAZ3039-BETTY4-Razer-Battery.html

Here, we provide other products for your reference:

ASUS C11P1618 3300mAh/12.5WH 3.85V

Medion A41-D17 3000mAh/45Wh 15V

Lenovo SB10F46456 4200mah/32Wh 7.6V

HP OM03XL 57Wh 11.55V

Alcatel TLP025G2 2580MAH 3.8V

LG BL-T24 4100Mah 3.85V

Bose 061384 2230mAH 7.4V

LENOVO L14C3K31 9600mAh 3.75V

HP 778951-421 15.2V

HP 503376-001 100-240V-/4A.50-60 Hz

07:50 1.7.2019 - 0 Kommentare

Msi BTY-M6F battery is compatible with MSI GS60,value price and high-quality performance.

  • ● Our batteries are 100% new and CE / FCC / RoHS certified for safety

  • ● We only use high quality materials and grade A cells to guarantee real capacity and higher recharge cycles.

  • ● Quick, friendly and trouble-free customer support and a full one-year warranty: if something goes wrong, we are at your disposal.

Brand : Msi
Capacity : 4640mAh
Voltage : 11.4V

  • product compatibility:

    • 16H2, GS60, GS60 2PC-010CN, GS60 2PC-279XCN, GS60 2PE-280CN, GS60 2PL-006XCN, GS60 2QC-022XCN, GS60 2QD-478CN, GS60 2QE-215CN, GS60 6QC-070XCN, GS60 6QC-257XCN, GS60 6QE-090CN, GS60 6QE-243CN, PX60

  • Instructions for Use

    • 1. New Msi BTY-M6F battery needs to be fully charged and discharged (cycled) a few times before it can condition to full capacity.

    • 2. Rechargeable batteries undergo self-discharging when left unused. Always store a BTY-M6F battery pack in a fully charged stage for storage.

    • 3. Fully drain and fully recharge your battery pack every few month.

    • 4. Li-ion and NiMH battery can not interchangeable.

    • 5. Turn down the LCD brightness of your portable device.

https://www.batteryclub.org/Goods/MSI2263-BTY-M6F-Msi-Battery.html

Here, we provide other products for your reference:

ASUS C11P1618 3300mAh/12.5WH 3.85V

Medion A41-D17 3000mAh/45Wh 15V

Lenovo SB10F46456 4200mah/32Wh 7.6V

HP OM03XL 57Wh 11.55V

Alcatel TLP025G2 2580MAH 3.8V

LG BL-T24 4100Mah 3.85V

Bose 061384 2230mAH 7.4V

LENOVO L14C3K31 9600mAh 3.75V

HP 778951-421 15.2V

HP 503376-001 100-240V-/4A.50-60 Hz

05:30 22.6.2019 - 0 Kommentare

Medion A41-D17 battery is compatible with Medion Akoya E7416 E7419 P7641 Erazer P7643, value price and high-quality performance.

Brand : Medion
Capacity : 3000mAh/45Wh
Voltage : 15V

Replaceability with the following models:

    • A41-D17

    • D17LS9H

    • 40060854

    • 40050714

      product compatibility:

    • for Medion laptopsMedion Akoya E7415Medion Akoya E7415TMedion Akoya E7419Medion Akoya E7416Medion Akoya E7641Medion Akoya E7641(MD99854)Medion Akoya E7641(MD99854)Medion Akoya E7643Medion Erazer P7647Medion Erazer P7643Medion Akoya E7420Medion Erazer P7643Attention:1.Li-Ion Laptop Battery 10.8V and 11.1V are in common use.2.Li-Ion Laptop Battery 14.4V and 14.8V are in common use.3.Li-Ion Laptop Battery 7.2V 7.4V and 7.5V are in common use.

https://www.batteryclub.org/Goods/MED19M243-A41-D17-Medion-Battery.html

Here, we provide other products for your reference:

Toshiba ER3V/3.6V 1200mah 3.6v

CUBOT X18 3200mAh/12.16WH 3.8V

Toshiba ER6VCT 2000mAh 3.6V

SOKKIA BDC70 5240mAh /38WH 7.2V

Lenovo L16D1P34 4850mAh 3.85V

Nec PC-VP-BP79 63WH 10.8V

Huawei HB396689ECW 4000MAH 3.82V

Motorola SNN5971A 300mAh 3.8V

Bose 061384 2230mAH 7.4V

ASUS A31N1519 2900mAh 11.25V

Lenovo L14L2P22 4160MAH 7.6V

Toshiba PA5208U-1BRS 3860mAh 10.8V

Lenovo BL253 2000mAh 3.8V

LG EAY63128701 100 - 240V, 50/60 Hz, 2.0A 19V

LG LCAP31 100 - 240V, 50/60 Hz, 2.0A 19V

05:28 22.6.2019 - 0 Kommentare

Samsung BA44-00215A adapter is compatible with Samsung NP700Z5B-S01UB,BA44-00215A, value price and high-quality performance.

Brand : Samsung
Input voltage : 100-240V 100-240V/50-60Hz
Output voltage : 4.74A 19V/4.74A/90W

  • Replaceability with the following models:

    • A13-090P3A AD-9019A AD-9019S 0455A1990BA44-00215A 0455A1990 SADP-90FH AA-PA1N90W AD-9019SL

  • Product Compatibility:

    • For Samsung NP700Z5B-S01UB BA44-00215ANP700Z5B-W01UB AA-PA1N90W NP700Z7C-S01US

https://www.batteryclub.org/Goods/SAM17877_2-BA44-00215A-Samsung-Adapter.html

Here, we provide other products for your reference:

Toshiba ER3V/3.6V 1200mah 3.6v

CUBOT X18 3200mAh/12.16WH 3.8V

Toshiba ER6VCT 2000mAh 3.6V

SOKKIA BDC70 5240mAh /38WH 7.2V

Lenovo L16D1P34 4850mAh 3.85V

Nec PC-VP-BP79 63WH 10.8V

Huawei HB396689ECW 4000MAH 3.82V

Motorola SNN5971A 300mAh 3.8V

Bose 061384 2230mAH 7.4V

ASUS A31N1519 2900mAh 11.25V

Lenovo L14L2P22 4160MAH 7.6V

Toshiba PA5208U-1BRS 3860mAh 10.8V

Lenovo BL253 2000mAh 3.8V

LG EAY63128701 100 - 240V, 50/60 Hz, 2.0A 19V

LG LCAP31 100 - 240V, 50/60 Hz, 2.0A 19V

05:26 22.6.2019 - 0 Kommentare

Msi BTY-M6A battery is compatible with MSI X-Slim X600 15.6inch Series NBPC623A, value price and high-quality performance.

Brand : Msi
Capacity : 5400mah
Voltage : 11.1V

  • product compatibility:

    • For MSI X-Slim X600 15.6inch Series NBPC623A

  • Instructions for Use

    • 1. New Msi BTY-M6A battery needs to be fully charged and discharged (cycled) a few times before it can condition to full capacity.

    • 2. Rechargeable batteries undergo self-discharging when left unused. Always store a BTY-M6A battery pack in a fully charged stage for storage.

    • 3. Fully drain and fully recharge your battery pack every few month.

    • 4. Li-ion and NiMH battery can not interchangeable.

    • 5. Turn down the LCD brightness of your portable device.

https://www.batteryclub.org/Goods/BTY19M257-BTY-M6A-Msi-Battery.html

Here, we provide other products for your reference:

Toshiba ER3V/3.6V 1200mah 3.6v

CUBOT X18 3200mAh/12.16WH 3.8V

Toshiba ER6VCT 2000mAh 3.6V

SOKKIA BDC70 5240mAh /38WH 7.2V

Lenovo L16D1P34 4850mAh 3.85V

Nec PC-VP-BP79 63WH 10.8V

Huawei HB396689ECW 4000MAH 3.82V

Motorola SNN5971A 300mAh 3.8V

Bose 061384 2230mAH 7.4V

ASUS A31N1519 2900mAh 11.25V

Lenovo L14L2P22 4160MAH 7.6V

Toshiba PA5208U-1BRS 3860mAh 10.8V

Lenovo BL253 2000mAh 3.8V

LG EAY63128701 100 - 240V, 50/60 Hz, 2.0A 19V

LG LCAP31 100 - 240V, 50/60 Hz, 2.0A 19V

04:37 12.6.2019 - 0 Kommentare

Shop SONY LIS1547ERPC battery 2300mah 3.8v, compatible with Sony Xperia Z2 Mini Z2A ZL2 Sol25 D6563 battery. Best service, comfortable shopping! 1-year warranty, 30-days money back!

ECNM10203_Te

  • Brand : SONY Battery

  • Type : Li-ion

  • Capacity : 3000mAh

  • Volatge : 3.8v

LIS1547ERPC Replaceable universal battery model:

LIS1547ERPC

Perfectly compatible with Sony Xperia Z2 Mini Z2A ZL2 Sol25 D6563:

Sony Xperia Z2 Mini Z2A ZL2 Sol25 D6563

Mobile phone battery repair tips

1. Refrigerator freezing method. Wrap the battery in paper, then wrap it in plastic wrap and put it into the frozen layer for about 3 days. After taking it out, place it in a cool place and let it dry for two days. Try charging again.Explanation: The process of using the mobile phone is a process of charging and discharging the battery, and the negative and positive charges in the battery collide with each other. The reason why it is more and more unreliable and troublesome is that at normal temperature, the kinetic energy of the electron is relatively large, the battery is in an active state, and the leakage is relatively frequent. When the battery is in a low temperature environment, the structure of the lithium film and the electrolyte on the surface does not change much, and the interface thereof changes significantly. The leakage current and the like are reduced, and the standby time is increased.2. Rubber wipe method. Using a clean eraser to wipe the metal surface of the phone's battery and the phone can also improve the use.Explanation: For a long time, the metal surface of the battery has a certain degree of oxidation, resulting in poor contact and short use time, while the rubber enamel can erase the oxide layer on the surface to make the contact better. This method is more suitable for situations where the problem is not very serious.3. Recharge the activation method. Discharge the battery completely and recharge it again.Detailed steps: Find two wires and connect a small 1.5-volt bulb. Connect the two ends of the wire to the positive and negative terminals of the battery. After connecting, the light bulb will emit some shimmer. Wait until the light bulb is completely extinguished and recharge. This can also be changed. Battery performance. But this method is not very effective, but it is still somewhat useful.

How to use the SONY LIS1547ERPC battery correctly

1. Do not run out of battery power and then recharge. Nowadays, smart phones use lithium-ion polymer batteries, which have no so-called "memory effect" in nickel-cadmium batteries, so there is no need to run out of batteries and recharge them. In fact, if the lithium battery is in a low voltage state for a long time, it will cause the phenomenon that charging cannot occur. So when the phone's power drops to less than 20%, it should be charged. Therefore, if the mobile phone is not used for a long time, it should be kept at full power as much as possible, and it will be charged for a while.2. Do not continue charging for a long time after the phone is fully charged. Many people like to charge while sleeping, and then unplug the charger the next day. In this way, the phone will automatically stop charging after the battery is fully charged. However, during the charging process, the battery is overheated, and even the burning takes place during charging. We should try to avoid charging the phone for a long time without being guarded.3. Don't play the phone while charging. Nowadays, the computing power of smart phones is very powerful. Nowadays, the power to play games with mobile phones is even greater. However, due to the limitation of the internal space of mobile phones, it is impossible to install cooling devices such as fans. Even if the copper pipes are cooled, they may not be as thorough as PCs. Therefore, we should try to avoid overheating in the process of using the smartphone. If you play mobile games at this time, the heat generated by the battery and the processor will be superimposed. In the long run, irreversible damage is caused to the components inside the battery and even the mobile phone. Therefore, it is not necessary to use the mobile phone as much as possible while charging.4. Do not charge your phone on the sofa/bed. As mentioned before, fever is the culprit that shortens the battery life of mobile phones, and the mobile phone can only self-heat. If you charge on the sofa or bed, it will cause the heat of the fuselage to accumulate, causing local overheating. In addition, the sofa, bed sheets and cotton wadding are all flammable. At this time, if an accident occurs, the possibility of fire will be great.5. Do not use the computer USB interface to charge the phone. Many people, including myself, use the USB interface of the computer to charge the phone for convenience. However, the USB interface current of many computers is less than 500mA, and the process of charging the mobile phone will be very long. What's more, the power supply mechanism of some computer motherboards is not perfect. If a variety of USB devices are connected or plugged in at the same time, the output current of the USB interface will be unstable, which is not conducive to the long-term use of the smart phone battery.6. Do not use the charging treasure to charge the phone for a long time. Although many charging treasures can provide high current charging of more than 1A or even 2.1A, charging treasure is not a power supply after all, and cannot guarantee continuous output of voltage/current. In addition, the charging treasure itself will generate a certain amount of heat when charging the mobile phone, so it is not recommended to use the charging treasure for charging the mobile phone for a long time, and it can only be used as an emergency.6. Do not use the phone for a long time in the case of too cold. Lithium batteries are not only afraid of heat, but also cold. In a cold environment, the activity of lithium battery and the lithium intercalation activity of the negative active material will be affected, and the battery capacity will decrease and the rate performance will decrease. When used at lower temperature conditions, lithium dendrites are formed on the surface of the negative electrode in severe cases, piercing the diaphragm and causing a safety accident. Android phones will also have a significantly shorter battery life at lower temperatures.

Other batteries you might find

Lenovo BL198 2000MAH 3.7V

ASUS C11P1320 3.8V

Lenovo BL219 2500mAh 3.8V

HTC BM59100 1700mAh 3.8V

Asus B11P1421 2100mah 3.8V

04:36 12.6.2019 - 0 Kommentare

Shop NOKIA BV-T3G battery 2300mah 3.8v, compatible with NOKIA Microsoft Lumia 650 battery. Best service, comfortable shopping! 1-year warranty, 30-days money back!

ECNM10204_Te

  • Brand : NOKIA Battery

  • Type : Li-ion

  • Capacity : 2000mah

  • Volatge : 3.8V

BV-T3G Replaceable universal battery model:

BV-T3G

Perfectly compatible with NOKIA Microsoft Lumia 650:

NOKIA Microsoft Lumia 650

Mobile phone battery repair tips

1. Refrigerator freezing method. Wrap the battery in paper, then wrap it in plastic wrap and put it into the frozen layer for about 3 days. After taking it out, place it in a cool place and let it dry for two days. Try charging again.Explanation: The process of using the mobile phone is a process of charging and discharging the battery, and the negative and positive charges in the battery collide with each other. The reason why it is more and more unreliable and troublesome is that at normal temperature, the kinetic energy of the electron is relatively large, the battery is in an active state, and the leakage is relatively frequent. When the battery is in a low temperature environment, the structure of the lithium film and the electrolyte on the surface does not change much, and the interface thereof changes significantly. The leakage current and the like are reduced, and the standby time is increased.2. Rubber wipe method. Using a clean eraser to wipe the metal surface of the phone's battery and the phone can also improve the use.Explanation: For a long time, the metal surface of the battery has a certain degree of oxidation, resulting in poor contact and short use time, while the rubber enamel can erase the oxide layer on the surface to make the contact better. This method is more suitable for situations where the problem is not very serious.3. Recharge the activation method. Discharge the battery completely and recharge it again.Detailed steps: Find two wires and connect a small 1.5-volt bulb. Connect the two ends of the wire to the positive and negative terminals of the battery. After connecting, the light bulb will emit some shimmer. Wait until the light bulb is completely extinguished and recharge. This can also be changed. Battery performance. But this method is not very effective, but it is still somewhat useful.

How to use the NOKIA BV-T3G battery correctly

1. Do not run out of battery power and then recharge. Nowadays, smart phones use lithium-ion polymer batteries, which have no so-called "memory effect" in nickel-cadmium batteries, so there is no need to run out of batteries and recharge them. In fact, if the lithium battery is in a low voltage state for a long time, it will cause the phenomenon that charging cannot occur. So when the phone's power drops to less than 20%, it should be charged. Therefore, if the mobile phone is not used for a long time, it should be kept at full power as much as possible, and it will be charged for a while.2. Do not continue charging for a long time after the phone is fully charged. Many people like to charge while sleeping, and then unplug the charger the next day. In this way, the phone will automatically stop charging after the battery is fully charged. However, during the charging process, the battery is overheated, and even the burning takes place during charging. We should try to avoid charging the phone for a long time without being guarded.3. Don't play the phone while charging. Nowadays, the computing power of smart phones is very powerful. Nowadays, the power to play games with mobile phones is even greater. However, due to the limitation of the internal space of mobile phones, it is impossible to install cooling devices such as fans. Even if the copper pipes are cooled, they may not be as thorough as PCs. Therefore, we should try to avoid overheating in the process of using the smartphone. If you play mobile games at this time, the heat generated by the battery and the processor will be superimposed. In the long run, irreversible damage is caused to the components inside the battery and even the mobile phone. Therefore, it is not necessary to use the mobile phone as much as possible while charging.4. Do not charge your phone on the sofa/bed. As mentioned before, fever is the culprit that shortens the battery life of mobile phones, and the mobile phone can only self-heat. If you charge on the sofa or bed, it will cause the heat of the fuselage to accumulate, causing local overheating. In addition, the sofa, bed sheets and cotton wadding are all flammable. At this time, if an accident occurs, the possibility of fire will be great.5. Do not use the computer USB interface to charge the phone. Many people, including myself, use the USB interface of the computer to charge the phone for convenience. However, the USB interface current of many computers is less than 500mA, and the process of charging the mobile phone will be very long. What's more, the power supply mechanism of some computer motherboards is not perfect. If a variety of USB devices are connected or plugged in at the same time, the output current of the USB interface will be unstable, which is not conducive to the long-term use of the smart phone battery.6. Do not use the charging treasure to charge the phone for a long time. Although many charging treasures can provide high current charging of more than 1A or even 2.1A, charging treasure is not a power supply after all, and cannot guarantee continuous output of voltage/current. In addition, the charging treasure itself will generate a certain amount of heat when charging the mobile phone, so it is not recommended to use the charging treasure for charging the mobile phone for a long time, and it can only be used as an emergency.6. Do not use the phone for a long time in the case of too cold. Lithium batteries are not only afraid of heat, but also cold. In a cold environment, the activity of lithium battery and the lithium intercalation activity of the negative active material will be affected, and the battery capacity will decrease and the rate performance will decrease. When used at lower temperature conditions, lithium dendrites are formed on the surface of the negative electrode in severe cases, piercing the diaphragm and causing a safety accident. Android phones will also have a significantly shorter battery life at lower temperatures.

Other batteries you might find

SONY LIS1547ERPC 3000mAh 3.8v

Lenovo BL198 2000MAH 3.7V

ASUS C11P1320 3.8V

Lenovo BL219 2500mAh 3.8V

HTC BM59100 1700mAh 3.8V

04:36 12.6.2019 - 0 Kommentare

Shop THL BL-06 battery 2300mah 3.8v, compatible with THL T6S THL T6 PRO battery. Best service, comfortable shopping! 1-year warranty, 30-days money back!

ECNM10205_Te

  • Brand : THL Battery

  • Type : Li-ion

  • Capacity : 2250mAh

  • Volatge : 3.7V

BL-06 Replaceable universal battery model:

T6S BL-06

Perfectly compatible with THL T6S THL T6 PRO:

THL T6S/THL T6 PRO

Mobile phone battery repair tips

1. Refrigerator freezing method. Wrap the battery in paper, then wrap it in plastic wrap and put it into the frozen layer for about 3 days. After taking it out, place it in a cool place and let it dry for two days. Try charging again.Explanation: The process of using the mobile phone is a process of charging and discharging the battery, and the negative and positive charges in the battery collide with each other. The reason why it is more and more unreliable and troublesome is that at normal temperature, the kinetic energy of the electron is relatively large, the battery is in an active state, and the leakage is relatively frequent. When the battery is in a low temperature environment, the structure of the lithium film and the electrolyte on the surface does not change much, and the interface thereof changes significantly. The leakage current and the like are reduced, and the standby time is increased.2. Rubber wipe method. Using a clean eraser to wipe the metal surface of the phone's battery and the phone can also improve the use.Explanation: For a long time, the metal surface of the battery has a certain degree of oxidation, resulting in poor contact and short use time, while the rubber enamel can erase the oxide layer on the surface to make the contact better. This method is more suitable for situations where the problem is not very serious.3. Recharge the activation method. Discharge the battery completely and recharge it again.Detailed steps: Find two wires and connect a small 1.5-volt bulb. Connect the two ends of the wire to the positive and negative terminals of the battery. After connecting, the light bulb will emit some shimmer. Wait until the light bulb is completely extinguished and recharge. This can also be changed. Battery performance. But this method is not very effective, but it is still somewhat useful.

How to use the THL BL-06 battery correctly

1. Do not run out of battery power and then recharge. Nowadays, smart phones use lithium-ion polymer batteries, which have no so-called "memory effect" in nickel-cadmium batteries, so there is no need to run out of batteries and recharge them. In fact, if the lithium battery is in a low voltage state for a long time, it will cause the phenomenon that charging cannot occur. So when the phone's power drops to less than 20%, it should be charged. Therefore, if the mobile phone is not used for a long time, it should be kept at full power as much as possible, and it will be charged for a while.2. Do not continue charging for a long time after the phone is fully charged. Many people like to charge while sleeping, and then unplug the charger the next day. In this way, the phone will automatically stop charging after the battery is fully charged. However, during the charging process, the battery is overheated, and even the burning takes place during charging. We should try to avoid charging the phone for a long time without being guarded.3. Don't play the phone while charging. Nowadays, the computing power of smart phones is very powerful. Nowadays, the power to play games with mobile phones is even greater. However, due to the limitation of the internal space of mobile phones, it is impossible to install cooling devices such as fans. Even if the copper pipes are cooled, they may not be as thorough as PCs. Therefore, we should try to avoid overheating in the process of using the smartphone. If you play mobile games at this time, the heat generated by the battery and the processor will be superimposed. In the long run, irreversible damage is caused to the components inside the battery and even the mobile phone. Therefore, it is not necessary to use the mobile phone as much as possible while charging.4. Do not charge your phone on the sofa/bed. As mentioned before, fever is the culprit that shortens the battery life of mobile phones, and the mobile phone can only self-heat. If you charge on the sofa or bed, it will cause the heat of the fuselage to accumulate, causing local overheating. In addition, the sofa, bed sheets and cotton wadding are all flammable. At this time, if an accident occurs, the possibility of fire will be great.5. Do not use the computer USB interface to charge the phone. Many people, including myself, use the USB interface of the computer to charge the phone for convenience. However, the USB interface current of many computers is less than 500mA, and the process of charging the mobile phone will be very long. What's more, the power supply mechanism of some computer motherboards is not perfect. If a variety of USB devices are connected or plugged in at the same time, the output current of the USB interface will be unstable, which is not conducive to the long-term use of the smart phone battery.6. Do not use the charging treasure to charge the phone for a long time. Although many charging treasures can provide high current charging of more than 1A or even 2.1A, charging treasure is not a power supply after all, and cannot guarantee continuous output of voltage/current. In addition, the charging treasure itself will generate a certain amount of heat when charging the mobile phone, so it is not recommended to use the charging treasure for charging the mobile phone for a long time, and it can only be used as an emergency.6. Do not use the phone for a long time in the case of too cold. Lithium batteries are not only afraid of heat, but also cold. In a cold environment, the activity of lithium battery and the lithium intercalation activity of the negative active material will be affected, and the battery capacity will decrease and the rate performance will decrease. When used at lower temperature conditions, lithium dendrites are formed on the surface of the negative electrode in severe cases, piercing the diaphragm and causing a safety accident. Android phones will also have a significantly shorter battery life at lower temperatures.

Other batteries you might find

NOKIA BV-T3G 2000mah 3.8V

SONY LIS1547ERPC 3000mAh 3.8v

Lenovo BL198 2000MAH 3.7V

ASUS C11P1320 3.8V

Lenovo BL219 2500mAh 3.8V

04:36 12.6.2019 - 0 Kommentare

Shop Lenovo BL212 battery 2300mah 3.8v, compatible with Lenovo Golden Warrior S8 S898T+ A708T A628T A620T battery. Best service, comfortable shopping! 1-year warranty, 30-days money back!

ECNM10206_Te

  • Brand : Lenovo Battery

  • Type : Li-ion

  • Capacity : 2000mAh

  • Volatge : 3.8V

BL212 Replaceable universal battery model:

BL212

Perfectly compatible with Lenovo Golden Warrior S8 S898T+ A708T A628T A620T:

Lenovo Golden Warrior S8 S898T+ A708T A628T A620T

Mobile phone battery repair tips

1. Refrigerator freezing method. Wrap the battery in paper, then wrap it in plastic wrap and put it into the frozen layer for about 3 days. After taking it out, place it in a cool place and let it dry for two days. Try charging again.Explanation: The process of using the mobile phone is a process of charging and discharging the battery, and the negative and positive charges in the battery collide with each other. The reason why it is more and more unreliable and troublesome is that at normal temperature, the kinetic energy of the electron is relatively large, the battery is in an active state, and the leakage is relatively frequent. When the battery is in a low temperature environment, the structure of the lithium film and the electrolyte on the surface does not change much, and the interface thereof changes significantly. The leakage current and the like are reduced, and the standby time is increased.2. Rubber wipe method. Using a clean eraser to wipe the metal surface of the phone's battery and the phone can also improve the use.Explanation: For a long time, the metal surface of the battery has a certain degree of oxidation, resulting in poor contact and short use time, while the rubber enamel can erase the oxide layer on the surface to make the contact better. This method is more suitable for situations where the problem is not very serious.3. Recharge the activation method. Discharge the battery completely and recharge it again.Detailed steps: Find two wires and connect a small 1.5-volt bulb. Connect the two ends of the wire to the positive and negative terminals of the battery. After connecting, the light bulb will emit some shimmer. Wait until the light bulb is completely extinguished and recharge. This can also be changed. Battery performance. But this method is not very effective, but it is still somewhat useful.

How to use the Lenovo BL212 battery correctly

1. Do not run out of battery power and then recharge. Nowadays, smart phones use lithium-ion polymer batteries, which have no so-called "memory effect" in nickel-cadmium batteries, so there is no need to run out of batteries and recharge them. In fact, if the lithium battery is in a low voltage state for a long time, it will cause the phenomenon that charging cannot occur. So when the phone's power drops to less than 20%, it should be charged. Therefore, if the mobile phone is not used for a long time, it should be kept at full power as much as possible, and it will be charged for a while.2. Do not continue charging for a long time after the phone is fully charged. Many people like to charge while sleeping, and then unplug the charger the next day. In this way, the phone will automatically stop charging after the battery is fully charged. However, during the charging process, the battery is overheated, and even the burning takes place during charging. We should try to avoid charging the phone for a long time without being guarded.3. Don't play the phone while charging. Nowadays, the computing power of smart phones is very powerful. Nowadays, the power to play games with mobile phones is even greater. However, due to the limitation of the internal space of mobile phones, it is impossible to install cooling devices such as fans. Even if the copper pipes are cooled, they may not be as thorough as PCs. Therefore, we should try to avoid overheating in the process of using the smartphone. If you play mobile games at this time, the heat generated by the battery and the processor will be superimposed. In the long run, irreversible damage is caused to the components inside the battery and even the mobile phone. Therefore, it is not necessary to use the mobile phone as much as possible while charging.4. Do not charge your phone on the sofa/bed. As mentioned before, fever is the culprit that shortens the battery life of mobile phones, and the mobile phone can only self-heat. If you charge on the sofa or bed, it will cause the heat of the fuselage to accumulate, causing local overheating. In addition, the sofa, bed sheets and cotton wadding are all flammable. At this time, if an accident occurs, the possibility of fire will be great.5. Do not use the computer USB interface to charge the phone. Many people, including myself, use the USB interface of the computer to charge the phone for convenience. However, the USB interface current of many computers is less than 500mA, and the process of charging the mobile phone will be very long. What's more, the power supply mechanism of some computer motherboards is not perfect. If a variety of USB devices are connected or plugged in at the same time, the output current of the USB interface will be unstable, which is not conducive to the long-term use of the smart phone battery.6. Do not use the charging treasure to charge the phone for a long time. Although many charging treasures can provide high current charging of more than 1A or even 2.1A, charging treasure is not a power supply after all, and cannot guarantee continuous output of voltage/current. In addition, the charging treasure itself will generate a certain amount of heat when charging the mobile phone, so it is not recommended to use the charging treasure for charging the mobile phone for a long time, and it can only be used as an emergency.6. Do not use the phone for a long time in the case of too cold. Lithium batteries are not only afraid of heat, but also cold. In a cold environment, the activity of lithium battery and the lithium intercalation activity of the negative active material will be affected, and the battery capacity will decrease and the rate performance will decrease. When used at lower temperature conditions, lithium dendrites are formed on the surface of the negative electrode in severe cases, piercing the diaphragm and causing a safety accident. Android phones will also have a significantly shorter battery life at lower temperatures.

Other batteries you might find

THL BL-06 2250mAh 3.7V

NOKIA BV-T3G 2000mah 3.8V

SONY LIS1547ERPC 3000mAh 3.8v

Lenovo BL198 2000MAH 3.7V

ASUS C11P1320 3.8V

04:36 12.6.2019 - 0 Kommentare

Shop Lenovo BL203 battery 2300mah 3.8v, compatible with Lenovo A308T A318T A365E A369 A66 battery. Best service, comfortable shopping! 1-year warranty, 30-days money back!

ECNM10207_Te

  • Brand : Lenovo Battery

  • Type : Li-ion

  • Capacity : 1300mAh

  • Volatge : 3.7V

BL203 Replaceable universal battery model:

BL203 BL214

Perfectly compatible with Lenovo A308T A318T A365E A369 A66:

Lenovo A278T A308T A318T A365E A369 A66Output Voltage:3.7VCharging Limited Voltage: 4.2VCapacity: 1300mAh/4.81WH

Mobile phone battery repair tips

1. Refrigerator freezing method. Wrap the battery in paper, then wrap it in plastic wrap and put it into the frozen layer for about 3 days. After taking it out, place it in a cool place and let it dry for two days. Try charging again.Explanation: The process of using the mobile phone is a process of charging and discharging the battery, and the negative and positive charges in the battery collide with each other. The reason why it is more and more unreliable and troublesome is that at normal temperature, the kinetic energy of the electron is relatively large, the battery is in an active state, and the leakage is relatively frequent. When the battery is in a low temperature environment, the structure of the lithium film and the electrolyte on the surface does not change much, and the interface thereof changes significantly. The leakage current and the like are reduced, and the standby time is increased.2. Rubber wipe method. Using a clean eraser to wipe the metal surface of the phone's battery and the phone can also improve the use.Explanation: For a long time, the metal surface of the battery has a certain degree of oxidation, resulting in poor contact and short use time, while the rubber enamel can erase the oxide layer on the surface to make the contact better. This method is more suitable for situations where the problem is not very serious.3. Recharge the activation method. Discharge the battery completely and recharge it again.Detailed steps: Find two wires and connect a small 1.5-volt bulb. Connect the two ends of the wire to the positive and negative terminals of the battery. After connecting, the light bulb will emit some shimmer. Wait until the light bulb is completely extinguished and recharge. This can also be changed. Battery performance. But this method is not very effective, but it is still somewhat useful.

How to use the Lenovo BL203 battery correctly

1. Do not run out of battery power and then recharge. Nowadays, smart phones use lithium-ion polymer batteries, which have no so-called "memory effect" in nickel-cadmium batteries, so there is no need to run out of batteries and recharge them. In fact, if the lithium battery is in a low voltage state for a long time, it will cause the phenomenon that charging cannot occur. So when the phone's power drops to less than 20%, it should be charged. Therefore, if the mobile phone is not used for a long time, it should be kept at full power as much as possible, and it will be charged for a while.2. Do not continue charging for a long time after the phone is fully charged. Many people like to charge while sleeping, and then unplug the charger the next day. In this way, the phone will automatically stop charging after the battery is fully charged. However, during the charging process, the battery is overheated, and even the burning takes place during charging. We should try to avoid charging the phone for a long time without being guarded.3. Don't play the phone while charging. Nowadays, the computing power of smart phones is very powerful. Nowadays, the power to play games with mobile phones is even greater. However, due to the limitation of the internal space of mobile phones, it is impossible to install cooling devices such as fans. Even if the copper pipes are cooled, they may not be as thorough as PCs. Therefore, we should try to avoid overheating in the process of using the smartphone. If you play mobile games at this time, the heat generated by the battery and the processor will be superimposed. In the long run, irreversible damage is caused to the components inside the battery and even the mobile phone. Therefore, it is not necessary to use the mobile phone as much as possible while charging.4. Do not charge your phone on the sofa/bed. As mentioned before, fever is the culprit that shortens the battery life of mobile phones, and the mobile phone can only self-heat. If you charge on the sofa or bed, it will cause the heat of the fuselage to accumulate, causing local overheating. In addition, the sofa, bed sheets and cotton wadding are all flammable. At this time, if an accident occurs, the possibility of fire will be great.5. Do not use the computer USB interface to charge the phone. Many people, including myself, use the USB interface of the computer to charge the phone for convenience. However, the USB interface current of many computers is less than 500mA, and the process of charging the mobile phone will be very long. What's more, the power supply mechanism of some computer motherboards is not perfect. If a variety of USB devices are connected or plugged in at the same time, the output current of the USB interface will be unstable, which is not conducive to the long-term use of the smart phone battery.6. Do not use the charging treasure to charge the phone for a long time. Although many charging treasures can provide high current charging of more than 1A or even 2.1A, charging treasure is not a power supply after all, and cannot guarantee continuous output of voltage/current. In addition, the charging treasure itself will generate a certain amount of heat when charging the mobile phone, so it is not recommended to use the charging treasure for charging the mobile phone for a long time, and it can only be used as an emergency.6. Do not use the phone for a long time in the case of too cold. Lithium batteries are not only afraid of heat, but also cold. In a cold environment, the activity of lithium battery and the lithium intercalation activity of the negative active material will be affected, and the battery capacity will decrease and the rate performance will decrease. When used at lower temperature conditions, lithium dendrites are formed on the surface of the negative electrode in severe cases, piercing the diaphragm and causing a safety accident. Android phones will also have a significantly shorter battery life at lower temperatures.

Other batteries you might find

Lenovo BL212 2000mAh 3.8V

THL BL-06 2250mAh 3.7V

NOKIA BV-T3G 2000mah 3.8V

SONY LIS1547ERPC 3000mAh 3.8v

Lenovo BL198 2000MAH 3.7V


« Letzte Seite  |  Einträge ansehen 1-50 von 80  |  Nächste Seite »
RSS Feed aller Mitglieder KV GmbH
Osnabrück
Osnabrück